Replacement Part – Aero Headlight Bracket - Works For Both Headlights & Tail Lights - 3 Strap Sizes Allows Fitting From 20mm To Over 100mm - Adjusts To Fit Aero & Round Seat Posts & Handlebars - Fits All Serfas Headlights Except: USL-200 & USL-450

- Axle mount - Made of steel - Fits 16-inch wheel bikes

- Thru-axle adaptor for TB-WS10 Professional Race Workstand - Works with 15mm and 20mm front forks

Tool-Free design fits 22-34mm handlebars - 2 x 10,000 MCD White LEDs - Constant (30 hrs), Chasing mode (55 hrs), Flashing mode (80 hrs) - Water resistant - CR2032 3V batteries (x2) included

An ultra-bright, high-capacity USB rechargeable light providing 850 lumens of light output and five lighting levels, plus reserve for longer run times. Dual-zone refractor lens design allows clear near and far visibility focusing the main beam downward to prevent affecting pedestrians or oncoming traffic. The included and optional handlebar mounts provide placement flexibility for mounting cycle computer, RideCase, single light, dual lights, CubiCubi backup battery, GoPro Session Cameras, and more. - Size: 10.4 x 3.8 x 3.8cm / 4.1" x 1.5" x 1.5" (Light+PowerPack) - Lamp: Cree XLamp XHP50.2 - Battery: 3.7V 3000mAh Lithium Ion (integrated) - Charge / Charge Time (Approx): Micro USB / 4-6hr - Input: 5V / 1A - Output: 6V / 1A - Lamp Housing: Forged aluminum / Injection molded polymer - Mount: Handlebar (25.4 - 31.8mm) (Shim included) - Waterproof: IPX 6 - Dual zone refractor lens, Low battery indicator, optional USB charging dock - Weight: 124g / 4.37oz (Light+PowerPack) MODE / BURN TIME (APPROX) - 850 Lumens (High) / 2.1hr - 450 Lumens (Middle) / 3hr - 200 Lumens (Low) / 7.5hr - 70 Lumens (Steady) / 17hr - 70 Lumens (Blinking) / 30hr

Give your Tacx trainer the best possible protection for storage and transport with this sturdy trainer bag. It's designed specifically for Tacx trainers and has a separate compartment on the inside for accessories. The double inner layer with foam lining provides optimum protection, minimizing the risk of damage.

- Storage Hooks with machine thread and nuts & washers - Sold as a pair

- Made of Cr-V steel - To be used with 1/2" driver

Chain Whip 1/2" x 3/32" w/Ergonomic handle

- Hex Key Wrench Set - Contains 2, 2.5, 3, 4, 5, 6, and 8mm standard & 4, 5, 6mm ball end

- For installation and removal of 20t splined Shimano/ISIS bottom brackets - To be used with 1/2" driver

CatEye's Bluetooth Speed/Cadence Sensor transmits your speed and cadence through your Bluetooth-compatible Smartphone to your handlebar-mounted CatEye Strada Smart cyclo-computer (sold separately). Download the CatEye Cycling app for iPhone/Android and you’ll get all your ride data and save your phone battery. Attack each ride and celebrate your successes on the bike!

Topeak's Smartphone DryBags are a great way to keep your smartphone handy for communication or to use as a GPS during longer rides. This pack features a foam body for protection from bumps and a clear touchscreen-compatible window for viewing your phone's display.

The Drive Thru is a dummy hub or chain keeper that replaces your wheel while cleaning the chain. It is a fast and effective way to clean your chain between races or in your garage. It allows you to fully rotate your cranks and shift through your complete range of gears while protecting the frame. It installs simply with one hand, and is quick and easy to change between bikes. The Drive Thru is also great for packing the bike for transport.  - Note: This product is thread pitch dependent. You must order the same thread pitch as the thru-axle in your bike. - Dummy axle is precision-machined from 7075 aluminum and knurled for easy grip. - Pulley is machined from durable Delrin. - Oil and solvent-resistant O-ring - Lead-in threads designed for quick insertion into the frame - No tools required, simple, one-hand installation - Weight: 62 grams

Battery Replacement Guide For E-Lume Series Headlights: - E-Lume USL-200/250, 1-Cell Li-Ion 1400 mAh (ESB-1400) - E-Lume USL-450/500, 1-Cell Li-Ion 2200 mAh (ESB-2200) - E-Lume USL-600/650/850/900, 1-Cell Li-Ion 2600 mAh (ESB-2600) - E-Lume USL-1100/1200, 2-Cell Li-Ion 2200 mAh (ESB-4400) - E-Lume USL-1500/1600, 2-Cell Li-Ion 2600 mAh (ESB-5200) - Battery Removal/Installation Instructions Included - Allen Key Tool Included

QuickClick mount for spring-style saddles. Works with all Topeak Wedge Bags. - Material: Injected nylon / Stainless steel - Weight: 50g / 1.76oz

Sport Camera Multi-Mount with quick release for mounting GoPro Hero series, Sony Action Cam series, Shimano Sport Camera, and Garmin VIRB X / XE on helmet, handlebar or saddle rails. Features angle adjustment for tilt and can be oriented for landscape or portrait modes. - Added Feature: Angle adjustment landscape or portrait orientation - Brackets: For Handlebar (fits 22.2 & 31.8mm) / Helmet / Saddle rails - Material: Engineering grade plastic - Max Load: Sport camera 200 g / 7.04 oz - Modular Multi-Mount Device: Adapters included for GoPro/Shimano Sport Camera/Garmin VIRB X/XE and Sony Action Cam

1/2" Dr. bit socket H10 for Campagnolo® B.B. 10mm bolt

Removes 4-notch BMX & single and single-speed freewheels. Use with 24mm wrench.

For CubiCubi 850 Lighthead - Cartridge battery - 850 Lumens / 3000 mAh battery - Charge phone and other devices with USB charge cable - Recharge via a micro-USB cable

- Dual-band Bluetooth and ANT+, magnetless sensor with integrated accelerometer - Quick pairing with CatEye Cycling app (Bluetooth) - Waterproof IPX7 (based on JIS C0920) - Works with Padrone Digital, Padrone Smart+, Padrone Smart*, and Strada Smart* *For Padrone Smart and Strada Smart, works in Mirror Mode only

• Use to install dust seals for Bluto and RS1 forks • See Service Manual for instruction

Use this ANT+ antenna to connect an ANT+ trainer to your computer. That enables you to use computer software during your training sessions, such as the Tacx Trainer software, Zwift, and TrainerRoad. These programs read the training data transmitted by an ANT+ trainer and can control the trainer. It features a long cable so the receiver can be placed close to the trainer for an optimal reception without loss. The antenna is compatible with all trainers that communicate wirelessly via ANT+.

Remove BB30 Bearings

Topeak makes it easy to air up your tires with the HybridRocket RX pump. This innovative little ride-saver is a CO2 inflator on one side and a standard pump on the other. It also boasts aluminum construction for superb durability and max pump power. The HybridRocket fits Presta valves, gets up to 160psi and easily fits into a jersey pocket.

- A great way to mount a light, computer, power meter or GPS unit in the center of a threadless stem - Made in the USA - Material: 6061 Aluminum - Weight: 24g - Outside Diameter: 26.0mm - Stem Size: Threadless 1-1/8"

In-vehicle charging adapter for charging USB rechargeable NiteRider lighting systems. Charging cable not included. System Compatibility - All Lumina Series - Swift Series - MiNewt Cordless Series - MiNewt Mini Series - Lightning Bug 120 - Sentinel - Solas - Omega - Sabre - Sentry Aero - Stinger

All of our head light mounts deliver rock solid mounting but for those that demand the most rigid set up, the NiteRider Lumina Handlebar Clamp Mount is here to deliver a high degree of performance and stability. Fits a max bar diameter of 35mm. SYSTEM COMPATIBILITY - Lumina Series - MiNewt Cordless Series - Mako Series WARRANTY - This NiteRider accessory is backed by NiteRider’s lifetime warranty that covers any defects in mechanical components (housings, covers, mounts and fasteners)

Helmet mount for all systems that use the slider mounting clip. Not compatible with Lumina Series Lights. System Compatibility - Pro Series - HID Series - Classic Plus & Select - Evolution & Digital Evolution - HeadTrip & Digital HeadTrip - TrailRat & TrailRat Select - RoadRat - Digital Patrol LED - Digital Patrol - Pre 2001 systems

The NiteRider Bullet offers excellent rear light projection and daytime visibility with Optimal VIZ. Keep tabs on battery life with the integrated low power indicator. - 200-lumen output - Group Ride Mode—be seen without distracting fellow cyclists - Varying steady and safety flash modes - USB rechargeable - FL1 Standard IP64 Water Resistant

The NiteLink remote allows the rider to pair and simultaneously power on/off the Lumina Max headlight and Omega EVO 300 taillight wirelessly. - All New design equipped with NiteLink Wireless Technology - Lights sold separately

Replacement/Spare Part – UNI-GO2 GoPro Adapter Bracket Allows mounting of Serfas headlights to GoPro action camera mount systems (e.g. helmet mount, handlebar mount, etc.) - Compatible with all current E-Lume and late model True Series headlights

- Designed to hold bladed spokes while tightening the nipples

- Gel contains non-Abrasive plastic beads that provide increased surface friction - Allows for reduced clamping force, prevents crushing of expensive carbon parts (Brake lever/Bar, Bar/Stem, Stem/Steerer, Seatpost/Frame, Etc) - Prevents corrosion/scuffing and quiets creaking noises - Can also be used on non-carbon parts where an increase in clamping friction and/or a reduction in clamping force is desired - Always follow the manufacturer's torque specifications when clamping carbon parts

The Skyliner is a front wheel support for use with Tacx classic trainers. It raises and supports the front wheel for a natural cycling position and increased stability. It also serves as a handle to carry the trainer.

For 3.2, 3.3, 3.5, and 4.0mm nipples.

For CubiCubi 1200 Lighthead - Cartridge battery - 1200 Lumens / 6000 mAh battery - Charge phone and other devices with USB charge cable - Recharge via a micro-USB cable

T-Shaped wrench with Torx 30/5mm hex

CatEyeSYNC - ONE touch control -Turn one light on and all your Sync lights come on. Using Wireless technology, CatEyeSYNC lights provide the ease of synchronizing all lights to operate as one. Check battery levels, customize modes , set brake mode function and synchronize flash pattern preferences using your Smartphone. Simple and superior 360-degree visibility is one touch away with up to 7 lights synced to operate as one. - When used with the other lights from the CatEyeSYNC family, SYNC Wearable gives you an extra way to be seen, day or night. Using the mobile app, SYNC Wearable can be synchronized with SYNC Core and SYNC Kinetic for 360-degree visibility. - Rechargeable wearable safety light - Clip-on bracket for easy installation to backpacks, saddle bags or clothing - Rubber strap bike mount included - Battery Auto Save (The mode automatically changes to flashing when the battery power gets low) - Excellent daytime visibility in Daytime HyperFlash mode - Group Ride mode eye-friendly to team riders behind - Superior side visibility - OptiCube lens technology - Li-polymer rechargeable battery - USB rechargeable (Micro-USB cable included) - 6 modes - Mode memory function SPECS - Synchronize all SYNC lights - One touch turns all lights on/off - Synchronize light modes and flashing timing for enhanced visibility (SYNC Wearable, SYNC Kinetic) - Synchronized Kinetic mode for dynamic visibility (when used with SYNC Kinetic) - Control with smartphone app - Pair the lights (up to seven lights) - Customize light modes - View remaining battery level - Turn on/off the lights - Turn on/off synchronization with other lights - "Find me" function lets the light flashing by tapping the button on app

The NiteRider Tail Light Rack Mount gives you the option to mount your tail light directly onto your rack-ready/-equipped bike via this rack mount accessory. System Compatibility - Sentinel - Solas - Sabre - CherryBomb - TL 5.0 SL

- Disc Brake Piston and Pad Alignment Tool - Reposition pistons or help align disc pads with this easy to use tool.  - It's made of Cr-Mo steel with a comfortable and oversize rubber handle for a great grip.

The NiteRider Tail Light Strap Mount allows for quick installation and fitment on to standard seat posts. It features a quick release tab that allows you to remove just your tail light, leaving the strap mount installed on the seat post; ideal for when you leave your bike unattended or when it's time for a recharge. System Compatibility - Sentinel - Solas - Sabre - CherryBomb - TL 5.0 SL Not compatible with omega 300 and sentry aero 260 tail lights.

The Micro Blast is what you need for easy inflation on the road or trail. This easy to use CO2 inflator head comes with two 16 gram threaded cartridges and a sweet little foam cartridge cover that protects from cold cartridges while in use. The simple spring push design makes it easy to inflate your Presta valved tube. - Fits all threaded CO2 cartridge sizes - Alloy mini head with threaded spring push design - Includes two 16g CO2 cartridges - Includes one reusable foam cartridge cover to fit 12g or 16g cartridges

- Totally 40 functions: - 04C2 Crank remover - 09C1 Freewheel tool for Shimano CS compatible cassettes - 33S1 15mm pedal wrench - 35V8 8x200mm hex key wrench with coating - 28P1 PH1 Philips screwdriver - 28S6 S6 Flathead screwdriver - 25H6 6" forged adjustable wrench - D8D4 Adapter (8mm to 1/2" Drive) - 12F8 Precise 8-groove spoke tool, for 10-15G - 11F3 Crank adaptor for Shimano Hollowtech II compatible - 53S3 Multi-speed freewheel turner  - 61A3 Chain tool, for 7~10 speed chains - 56E6 Glueless patch AirDam - 64P3 POM tire levers, set of 3 pcs - 39H4 9x10mm open end wrench - 97T1 "Star-8" T-9x10x15x20x25x27x30x40 Star Keys - 97Y1 "Mighty-7" 2x2.5x3x4x5x6mm Hex Keys, T-25 star key

- Cable Cutter - Cuts cable, housing and wire quickly and easily. - Thumb-lock closure is easy to open and protects cutter when closed.

Replacement Part – Universal Handlebar Bracket - Fits all current Serfas headlights with a removable bracket - Fits bars up to 31.8mm horizontal & vertical adjustable - Easily removes from bar in seconds - No tools needed - Works With: TSL-100, TSL-150, TSL-150+, TSL-200, TSL-250, TSL-250+, TSL-500, TSL-500+, TSL-1000, TSL-1500, SL-155, SL-255, USL-155, USL-305, USL-505, TSL-350, TSL-550, TSL-750, TSL-T1000, TSL-LT1000, TSL-1200, TSL-1800, TSL-2500, HL-1.1, & SL-30WP - Works for all Serfas headlights EXCEPT for SL-200 & SL40WP

The OTTO Mount is an accessory for on-the-bike carry of OTTOLOCK. It's made of flexible silicone and has four ladder-strap hooks to ensure a snug, secure fit for multiple places on your bike. Note: Make sure all four hooks are engaged with your OTTO Mount ladder strap, and you position the OTTOLOCK head weight near the clamp to ensure you do not lose your OTTOLOCK. - Recommended for the 18" OTTOLOCK only - Flexible inner fit-up diameter accommodates 1 – 2" (25 – 51cm) round bicycle tubes - Material: silicone

- Creates a ceramic coating for incredible durability and long distance performance - Provides ultra low friction for ultimate drivetrain efficiency - Waterproof qualities excelling in wet conditions - 95% biodegradable

- 2 Super bright LED's per light - Easy On/Off - Just push the lens - Weather-tough water resistant design - Universal rubber bracket

The NiteRider Tail Light Mount – Seatstay and Seatpost is our classic seatpost mount design that gives riders the option to mount their tail light to their seat stay, using the included seat stay clamp. System Compatibility - Sentinel - Solas - Sabre - CherryBomb - TL 5.0 SL

Cell Phone Top Tube Bag - Replaceable Cover (Lt-Stm4Rt) - Large Secondary Pocket - Secure Three Strap Design - Touch Screen Capable Replacement Cover - Cell Phone Cover Will Fit Up To Iphone 6+™ - Size: 7” X 4” X 3.75” - 105 Cubic Inches

Optional mounting bracket for the CatEye Rapid X, CatEye Rapid X2, and CatEye Rapid X3. Allows you to mount your Rapid to any of the CatEye tail light brackets.

• Aero design rear rack for road bikes without seatstay rack mounts • Adjustable struts fit various seatstays • Installs and removes easily with center bolt clip and seatstay straps • RX QuickTrack™ system is compatible with RX TrunkBag EX • Fits road tires up to 700 x 25c

Pro Series Low Profile Helmet Mount (Not for Lumina Series Lights) System Compatibility: - Pro Series - HID Series - Classic Plus & Select - Evolution & Digital Evolution - HeadTrip & Digital HeadTrip -TrailRat & TrailRat Select - RoadRat - Digital Patrol - Pre 2001 Systems

The NiteRider Lumina Handlebar Strap Mount offers a wide variety of handlebar size fitments and remains rock solid while riding through rough terrain. It’s easy to install and, like all NiteRider mounts, features a quick release tab for when it’s time to recharge or leave your bike unattended. System Compatibility: - Lumina Series - Mako Series - MiNewt Cordless Series

The NiteRider Adjustable Angle Tail Light Strap Mount was specifically designed for our flagship tail light, the Sentinel. It allows you to fine-tune the mounting angle of the light to display the projected Laser Lanes even and parallel on the ground. It's an easy on and off non-slip tail light mount that also features a grooved contact pad that makes this the 'go to' mount for riders using aero seat posts. System Compatibility - Sentinel - Solas - Sabre - CherryBomb

The NiteRider Omega 300 Seat Post Straps install quickly and easily with the loop around and hook design. - Compatibility: Omega 300 Tail Light only - Fits 27.2mm seat posts

The Explorer headband adjusts to various head shapes and sizes. System Compatibility: - Explorer 350 - Pro Series - HID Series - Classic Plus & Seclect - Evolution & Digital Evolution - HeadTrip & Digital HeadTrip - TrailRat & TrailRat Select - RoadRat - Digital Patrol LED - Digital Patrol - Pre 2001 systems

Handlebar mount for all systems that use the slider mounting clip. Fits handlebar clamp diameters from 25.4mm–35mm. System Compatibility: - Pro Series - HID Series - Classic Plus & Select - Evolution & Digital Evolution - HeadTrip & Digital HeadTrip - TrailRat & TrailRat Select - RoadRat - Digital Patrol LED - Digital Patrol - Pre 2001 systems

- Nipple Wrench for Deep Rims - The V-spring grabs the nipple to screw on deep rims to prevent the nipple from dropping. - With depth control function to release the nipple after 3~4 mm on the spoke. - Also can use with 1/4" electric screwdriver.