Parts & Accessories

Yakima's Chain Straps are replacement bike holding straps for various models of Yakima's trunk and hitch racks. The stretchy, sturdy rubber is easy on your bike's finish and is extremely durable for long life.

- Fat straps are used to carry over sized (fat) tire bikes on Two/Four Timer bike racks. - Includes two straps - Weight: 0.44 lbs. - Dimensions: L 15.50 in x W 1.00 in x H 18 in

Yakima's HandCuff keeps your bikes secure when attached to the SwingDaddy and RidgeBack (both sold separately). Plus, there's a universal key and an additional SKS Lock Core so you can have the same key that locks your bikes to the rack and your rack to the hitch.

Long gone are the days when your vehicle's spare tire gets in the way of an epic bike trip. This handy little extension adds 7.25 inches to a 2-inch hitch receiver, giving you the clearance to attach just about any 2-inch bike rack. We're looking at you Broncos, Wranglers, and G-wagons. - Extends your 2" hitch receiver by 7 1/4" - Secures to any 2" hitch receiver using a threaded pin - Heavy-duty steel construction - Provides clearance to most spare tires; please measure your spare tire before hand - Compatible with the following Yakima Hitch Racks: Dr. Tray, OnRamp, HoldUp EVO, HoldUp, TwoTimer, HangOver 4, FullSwing, LongHaul, RoadTrip, EXO System Product Specs: - Weight: 8.63 lbs. - Dimensions: L 12.75 in x W 3.00 in x H 3.00 in - Limited Lifetime Warranty

With Thule's Fat Tire Kit for T2 Racks you can finally throw your fat bike on your Thule rack (sold separately) and head for the hills. Oversize wheel trays accommodate tires up to 5-inches wide and the tray has been shaped to work perfectly with even the widest treads. An extra-long wheel strap is included to make fastening your rear wheel a breeze. This kit attaches easily to your Thule T2 hitch rack (sold separately) and includes the mounts needed for a single bike.

Custom fit kit for mounting a Thule roof rack system to vehicles without pre-existing roof rack attachment points, or factory-installed racks.

Modifies women's bike frames as well as BMX and non-standard frames to be carried on a hanging-style hitch and strap mount bike racks. Thule's Frame Adapter is an ingenious solution for carrying bicycles without standard top tubes (for example, some dual-suspension, BMX, and step-through frames), on rear-mounted car racks. The Frame Adapter attaches quickly and easily and lets the rack carry your bike securely. Features: - Telescopic adjustment (18" - 30.5”) fits most bike frames - New push button clamps for quick installation and removal - Molded rubber pads protect the bike finish - Thule Frame Adapter 982XT - Keeps bike securely centered and mounted on hanging-style rear mounts - Durable rubber collars secure easily and safely to bike stem and seat post

Thule Traverse Fit Kit is designed to integrate with the Thule Traverse foot, creating a multi-purpose roof rack base system for your specific vehicle. The unique fit that the Fit Kit provides is the most solid and secure base rack possible.

Thule's Load Bar End Caps are replacement end caps for rectangular load bars.

Two heavy-duty straps with cam-action buckles secure heavy loads while our patented buckle bumpers help to prevent vehicle scratches and dings. - Each strap features steel cam-action buckles and protective Buckle Bumpers that fit snugly over buckles to protect vehicle and load at all times - Packaged as a pair - 15-foot length or 9-foot length

Thule's Passive Lock Strap provides added security by locking your bicycle rack to your vehicle. Two steel cables enclosed in nylon form a strong durable strap that won’t scratch your vehicle, bike or carrier. A round puck installs securely in trunk or hatch, preventing rack removal.

Thule's Snug-Tite Receiver Lock secures their T2, Doubletrack, Roadway, and Parkway receiver-type racks (also called "hitch racks"). Just insert the Snug-Tite in place of your receiver pin and the rack is locked in place.

Adapt your Swagman bike rack to accommodate fat bikes with wheel trays specifically made for extra-wide tires. - Fat Bike Wheel Holder (set includes 1 inner, 1 outer wheel tray) - For use with Swagman's Quad 2+2 or Chinook bike racks

The HUSKE (HUb Standards Keep Evolving) is a universal fork mount that handles the most common fork mount standards of yesterday, today, and tomorrow. Interchangeable plugs fit into an anodized aluminum extrusion (sold separately). These interchangeable plugs fit into an anodized aluminum extrusion (sold separately). Suitable for all SeaSucker fork-mount racks: Talon, Mini Bomber, Bomber, and Falcon.

Simply insert Saris' Hitch Tite into the hitch receiver to give your Saris bike rack (sold separately) extra stability. The Hitch Tite is compatible with the Bike Porter Hitch 2-Bike, Freedom, Axis Steel, Axis Aluminum, Cycle-On, and T-RAX Sport racks.

Saris' Locking Hitch Tite adds both stability and security to your hitch rack. It tightens up the interface between your rack and hitch to combat swaying and it locks your rack to your vehicle. It fits 1-1/4 and 2-inch threaded hitch-tites and is compatible with the 200/500 Series T-Rax, all Thelma racks, standard-model Cycle-Ons, and all the T-Bones racks (each sold separately).

Saris' Wheel Straps keep your front wheels from spinning and your handlebars from turning in the wind. They're made of tough nylon with easy-to-use buckle closures. Wheel Straps are sold in pairs.

Kuat Racks Phat Bike Kit. This item includes the strap extender for the rear tire strap and a secondary Velcro strap for the front tire.

Yakima's 1A HighRise Spacers convert their standard 1A RainGutter Towers (sold separately) into HighRise towers for more clearance. They give a rock-solid foundation for your Yakima roof rack (for vehicles without factory roof racks).

Yakima's 9-foot SKS Cable provides a visible theft deterrent for bikes and gear. It locks your load to the crossbar so you can park and leave your vehicle without worrying about your bikes.

Make just about any accessory lockable with an SKS accessory housing. Use with bike, boat or BasketCase accessories that don't accept SKS lock cores. SKS lock cores sold separately. - Lock rack accessories to your vehicle's crossbar - Use with bike, boat, and BasketCase accessories - SKS Lock Cores sold separately Product Specs: - Weight: 0.20 lbs. - Dimensions: L 4.00 in x W 3.25 in x H 1.00 in - Limited Lifetime Warranty

Go sleek with this low-profile t-slot awning bracket and mount up your awning with more options. This hardware kit replaces the standard mounting hardware of your awning and gives you multiple height settings to help you dial in your preferred look, including a rear deploy option. Product Details - ?Configurable in multiple height settings to allow a custom position on your vehicle. - T-slot design for easy attachment to Yakima HD Bar, JetStream, LockNLoad Platform and other standard t-slot crossbars - Rear deploy compatible with SlimShady 4.5 on a LockNLoad platform or HD Bar - Heavy-duty steel construction with durable, powder-coated finish - Compatible with all Yakima SlimShady awnings Product Specs - Weight: 3.78 lbs. - Dimensions: L 5.75 in x W 3.25 in x H 4.65 in

Hitch rack swing adapter. Now you can rack up the bikes and still access your tailgate. The BackSwing hitch adapter turns your hitch product into an easy-to-use swing-away rack that locks up tight while you're on the road. It works seamlessly with most 2" bike racks, like the HoldUp EVO - as well as almost any other rack using a 2" receiver - to let you swing your fully loaded rack out of the way so you can easily get to your coolers, gear, and Fido. Product Details: - Hitch extension converts most 2" hitch products to a swing-away rack - Provides easy tailgate access - even with a rack fully loaded with bikes - Easily swings open 90 degrees and locks in place with the simple to use release lever - Safety latch secures the rack closed while you're on the road - Secures to any 2" hitch receiver using a threaded pin - Included SKS (Same Key System) lock keeps the rack secure - 250 lb maximum load capacity (rack plus gear) Product Specs: - Weight: 35.46 lbs - Dimensions: L 20.00" x W 30.00" x H 8.00" Installation Details: - Some Assembly Required - 10 Minute Install - 2" Hitch Receiver Required Compatible with the following: - Dr.Tray- 2" only (without the EZ+1 attached) - SingleSpeed - HangOver 4 - 4 Bike only - TwoTimer - HoldUp EVO - HoldUp EVO +2 - HoldUp - HoldUp +2 - FourTimer - LongHaul (Vans and Passenger Vehicles Only) - RoadTrip (Vans and Passenger Vehicles Only)

This simple kit easily adapts our OverHaul HD™ and OutPost HD™ truck rack systems to work seamlessly with Yakima HD Tracks—without sacrificing the rack’s 500-lb. on-road carry capacity or its exclusive new 300-lb. Yakima Off-Road Rating (Weight ratings will vary based on application). - Complete kit that works on Yakima HD Track - Designed specifically for OverHaul HD and OutPost HD truck rack systems - Build to last, with aluminum and corrosion-resistant hardware - Maintains both OverHaul HD and OutPost HD 500-lb. on-road and 300-lb. off-road ratings (weight ratings will vary based on application)

Make carrying your boat highway safe with these bow/stern tie downs. Forget about tying knots, these tie downs feature handy ratchet pulleys that are easy to use and are corrosion resistant. They're also great for securing non-nautical loads like ladders or lumber. - Secures the bow and stern of any boat - Best in class corrosion resistance - Clear plastic tubes protect your vehicle from damage

Whether you're tinkering on your gear, prepping a meal for your crew, or mixing drinks for a night of fun, the EXO BackDeck is the perfect solution, turning your EXO system from gear hauler to working surface to bar top in seconds. When you're done, simply stow it and get back on the road. - Connects to the EXO SwingBase or EXO TopShelf in seconds using the EXO cleat system - 50" x 17" UV protected bamboo work surface - Tool-free, locking SpeedKnobs attach and lock EXO BackDeck to EXO SwingBase or EXO TopShelf - Included bag protects the tabletop when not in use and makes for easy transport - Sized to store inside the EXO GearLocker or EXO GearWarrior - 80lb weight capacity - 1 Year Warranty - Not intended to be used as a cutting surface - Requires EXO SwingBase and/or EXO TopShelf Product Specs: - Weight: 10.80 lbs. - Dimensions: L 17.00 in x W 50.50 in x H 0.75 in - Limited One Year Warranty

Make the most of your EXO GearLocker with the EXO GearTotes, collapsible, dividable totes that make it easy to stay organized from house to vehicle to destination and back again. A durable ripstop nylon build, and 50-pound carrying capacity make these perfect for everything from groceries to gear. - Heavy-duty totes carry up to 50 lbs. of gear each - Perfectly sized for the EXO GearLocker - Totes fold flat for easy storage when not in use - Includes a removable divider with hook-and-loop attachment - Structural webbing handles make it easy to haul loaded totes to your vehicle or campsite - Made of 600D fabric with durable PU Coating - Each tote measures 13" x 17.5" x 9" - Sold as a 2-Pack - 1 Year Warranty Product Specs: - Weight: 4.09 lbs. - Dimensions: L 18.00 in x W 13.50 in x H 9.50 in - Limited One Year Warranty

Hardcore adventurers like keeping things safe on the road. EXO LitKit ensures you are street-legal when using the Yakima EXO System. Simply attach to the EXO SwingBase arms to keep your license plate and taillights visible, no matter your configuration. - Keeps your lights and license plate visible while on the road - Uses 4-Flat electrical connection and includes all necessary wiring to connect to your vehicle's wiring harness - Tool-less install onto the EXO SwingBase arms - Attachment points allow EXO LitKit to rotate down and out of the way to easily switch between EXO Accessories - Powerful LED taillights have full brake, turn signal, and lighting functionality - Flexible license plate attachment helps protect your plate from steep driveways - Fits all US and Canada plates - 2 Year Warranty - Not intended to remain installed when Swing plate arms are closed - For EXO SwingBase only Product Specs: - Weight: 5.00 lbs. - Dimensions: L 24.50 in x W 50.00 in x H 10.00 in - Limited Two Year Warranty

Organize and stow your camp kitchen gear with this all-in-one system, simplifying your effort so it’s always ready to grab-and-go. The rugged, road-worthy box can seamlessly attach to the EXO System for smooth transport to your campsite, trailhead, or ball game. Open it up and turn it into a fully functional work station, making it easy to prep, cook, and serve from the same spot. The system can also be expanded with side-mounted tables and a free-standing Leg kit to grow and customize your EXO OpenRange as needed. PRODUCT DETAILS - Connects to the EXO SwingBase or EXO TopShelf in seconds using the included EXO cleat system - Durable rotomolded enclosure with a rubber door seal keeps your gear fully protected from weather, dust, and critters - Fold down front door allows easy access to your gear and can be used as a prep surface - Internal shelf and integrated utensil drawer help to organize your cooking and camp gear - 85 liters (90 quarts) of internal storage space - Includes SKS locking latches to secure your gear - Tool-free, locking SpeedKnobs attach and lock EXO OpenRange to EXO SwingBase or EXO TopShelf - Includes a lantern hook, backboard organizer and handheld bottle opener - Full suite of accessories available to expand your EXO OpenRange - EXO SwingBase and EXO TopShelf recommended but not required for transport - Made in the USA PRODUCT SPECS - Weight: 37.00 lbs. - Dimensions: L 31.00 in x W 18.00 in x H 18.00 in - Limited Lifetime Warranty

Getting pressurized water to your destination just got even easier. The EXO RoadShower Kit lets you attach the RoadShower 4G and 7G to your EXO system giving you more mounting options for your RoadShower. Product Details - Connects RoadShower 4G and 7G to the EXO SwingBase or EXO TopShelf in seconds using the EXO cleat system - Tool-free, locking SpeedKnobs attach and lock RoadShower 4G and 7G to EXO SwingBase or EXO TopShelf - Heavy-duty steel construction with durable, powder-coated finish - Includes all mounting hardware (EXO System and RoadShower are sold separately) - Not compatible with RoadShower 10G Product Specs - Weight: 2.46 lbs. - Dimensions: L 14.00 in x W 3.00 in x H 4.00 in