Filter By:
- Smart Trainers (6)
- Trainers (2)
- Rollers (2)
- Parts & Accessories (28)
- Show More Brands
- Show Fewer Brands
- Show More Sizes
- Show Fewer Sizes
Indoor Cycling
$409.99
The KICKR HEADWIND is the first ever smart fan, designed with the cyclist in mind. Its Targeted Airflow Pattern mirrors the shape and position of a cyclist's body while riding. The KICKR HEADWIND is sensor controlled so as your speed or heart rate increases, so will the fan speed, and there are also 4 manual speed settings should you want to set your own ideal airflow. With speeds of over 30 mph (48 kph), the KICKR HEADWIND will keep you cool during the toughest training sessions.
- With wind speeds topping out at over 30 mph the KICKR HEADWIND will keep you cool during your hardest efforts.
- The Targeted Airflow Pattern of the KICKR HEADWIND is designed to mirror the shape and position of a cyclist's body while riding on a bicycle.
- Control the speed of your KICKR HEADWIND by pairing your ANT+ speed sensor, heart rate monitor, or smart trainer directly to the fan. As your speed or heart rate increases so will the fan speed.
- Pair to the Wahoo App via Bluetooth for easy fan speed control at your fingertips.
- Control the KICKR HEADWIND with a simple press of a button. Four (4) preprogrammed fan speeds allow you to select your ideal airflow.
- The KICKR HEADWIND was specially designed to fit with the KICKR DESK. The wheels on the KICKR HEADWIND allow you to roll the fan into position when it is attached to your KICKR DESK.
$1,099.99
The most convenient and natural indoor training experience. Designed to deliver the smooth ride experience of rollers with the added performance advantages only Wahoo can deliver.
SAFETY TIRE GRIPPER
The KICKR ROLLR safety tire gripper can hold up to a 2.1"" (53mm) tire to keep your bike upright and secure, making it easy to get on and off the bike while providing confidence-inspiring stability, even when sprinting.
QUICK-ADJUST WHEELBASE CLAMP
Setting up or switching bikes is simple on KICKR ROLLR, making it perfect for use with multiple bikes. Just open up the quick-adjust wheelbase clamp, slide the front and back wheel chocks to match your bike's wheelbase, and you're ready to roll.
POWER METER CONNECT
Connect Wahoo POWRLINK ZERO power pedals or other ANT+ power meters to get the benefits of training with power. ROLLR provides power readings to within +/-1% accuracy of the power meter, allowing you to train with the same precision, indoors and outdoors.
In the box:
- KICKR ROLLR
- AC Power Adapter
- Owner's Manual
Supported Devices:
- iOS
- Android
- PC (Mac and Windows)"
$32.99
Lost or need to replace your wheel block for the Wahoo KICKR SNAP? This accessory is designed to keep your bike stable and level while using the SNAP indoor trainer.
$115.00
The Wahoo KICKR Floormat is the perfect partner for your KICKR. It's water resistant and anti-slip to keep the trainer in place no matter how much you sweat! The thickness and material make it noise insulating, so your family will thank you during those early morning rides.
- Impervious to sweat and spilled water bottles.
- Gripping texture keeps the KICKR in place, so you can focus on your ride.
- Material helps to reduce noise and make the KICKR even quieter.
- Beveled edge keeps the mat in line with the floor.
$34.99
Use these axle nuts to put a city or track bike in a Tacx trainer. The available axle nuts are M10x1 (T1415) and 3/8 Shimano Nexus (T1416). For use with Tacx classic trainers only
$159.99
This handlebar bracket has been developed so you can attach a tablet to your handlebars. The design provides a safe distance so that no sweat falls on the screen while you are training.
- Suitable for handlebars with a diameter ranging from 26mm to 35mm
- Adjustable to different tablet sizes: length 182-267mm, width 112-197mm, max. thickness 13mm
$114.99
This freehub body enables you to fit a Campagnolo cassette on the NEO Smart and the FLUX Smart. Suitable for 9 through 11 speed Campagnolo cassettes.
How to place the Campagnolo Body:
1. Remove the cap with a 5-millimeter Allen key.
2. Replace the Shimano/SRAM body with the Campagnolo body.
3. Place the cap on the Campagnolo body and tighten with a 5-millimeter Allen key.
$94.99 - $99.99
Use these quick releases to put a racing bike with disc brakes or a mountain bike with a quick-release skewer in a Tacx direct drive trainer. Both axles are supplied with an adapter set so you can select the right combination for your bike. These axles are only suitable for the Tacx direct drives.
$95.99
- Adapter for Tacx Direct Drive trainer
- 01 is compatible with 142 x 12mm and 148 x 12mm
- 02 is compatible with 135 x 10mm
- 03 is compatible with 135 x 12mm (w/5 mm spacer included with every Tacx Direct Drive
trainer), 142 x 12mm and 148 x 12mm
- 04 The thru axle adapter kit is for bikes with a 12 mm thru axle. The axle adapter is required to couple the rear stay with the
thru axle mount on a Tacx NEO or FLUX Smart trainer.
$49.99 - $64.99
The E-Thru Trainer Axle allows the use of a mountain bike in a Tacx trainer. These axles are only suitable for Tacx classic trainers.
$229.99
Take your ride inside with Tacx Boost. You won't need external power to use this trainer, thanks to a forceful magnetic brake that allows you to directly apply resistance or lighten it. Resistance can be controlled with a lever on the handlebar. The setup is easy—with just two simple clicks you mount your bike and you are ready to ride.
SIMPLE SETUP
With just two simple clicks, you'll be ready to ride.
SMALL BUT STABLE
This indoor trainer has a small footprint, 675 x 650 mm (26.6" x 25.6"), but provides a sturdy ride.
EASY TO STORE
Multifunctional front wheel support serves as a handle to carry the trainer and ensures a natural cycling position.
MAGNETIC BRAKE
You won't need external power to use this trainer, thanks to a forceful magnetic brake that allows you to directly apply resistance or lighten it.
RESISTANCE CONTROL
A simple lever on your handlebar lets you control the resistance; 10 levels, up to 1,050 watts.
REALISTIC RIDE FEEL
An actual flywheel generates a realistic and smooth pedal stroke.
SMOOTH AND QUIET
The closed resistance unit reduces noise and makes for a smoother ride.
HOW FAR AND HOW FAST
Add a speed sensor (sold separately) to track how far and how fast you're riding and train with some of your favorite apps.
FEATURES
- Magnets: 2x8 Permanent ferrite magnets
- Transmission: Roller, 30 mm
- Electrical requirements: No voltage required
- Power indicator: None
- Connection indicator (ANT/BT): None
- Firmware upgradable: No
- Suitable bikes: Road, Tri, & MTB with skewer quick release
- Supplied with: Front wheel support, quick release for road bikes and mountain bikes (5mm)
SPECIFICATIONS
- Max. power (40 km/h): 1050 Watt
- Simulation of descent: No
- Max. torque: 17 Nm
- Max. brake force: 50 N
- Flywheel: Actual of 1.6 kg
- Mass inertia: 9.18 kg (20.2 lbs)
- Footprint (LxW): 675 x 650 mm (26.6 x 25.6 in)
- Height 410 mm (16.1 in)
- Dimensions when folded 565 x 410 x 245 mm (22.2 x 16.1 x 9.65 in)
- Weight 8.53 kg (18.8 lbs)
$975.00
Reliable. Durable. Quieter Than Ever Before.
When it comes to indoor bike trainers, the most frequently asked question is: how quiet is it? Taking this to heart, our Madison, Wisconsin-based team put this query under the microscope and set a goal to build a trainer so quiet, that the only sound is that of your drive train.
The result? A direct drive smart trainer that touts a sound specification of 59 decibels at 20 mph. In other words, the H3 is five times quieter than previous generations, making it the quietest smart trainer to ever leave our doors.
Following the Saris direct drive smart trainer legacy, the H3 features the same reliably and durability as its predecessors. Each H3 is made from cast and machined aluminum sourced from America’s heartland. Encased inside are components meticulously calibrated to measure power, speed and cadence, as well as a precision-balanced flywheel - all built to handle 2000 watts and replicate a 20% climbing grade.
Tested to withstand heavy training, the H3’s internal cooling system will keep the electromagnetic resistance system working – and accurate – long after your legs have given out.
- Quieter Than Ever: all new drive system shaves decibels off previous generations.
- Precise Training: +/- 2% power accuracy.
- Controlled and Consistent: electromagnetic resistance provides a measured workout every time.
- Direct Drive Design: widest bike compatibility and eliminates wheel slips.
- No External Sensors Required: measures speed, cadence and power.
- Seamless Integration: connects to indoor cycling apps with dual ANT+ FE-C and Bluetooth FTMS standards.
- Zwift certified.
Specs
- Noise level: 59 decibels at 20 mph
- Power measurement accuracy: +/- 2%
- Maximum power output: 2000 watts at 20 mph
- Simulates a 20% climbing grade
- Fast response electromagnetic resistance
- Measures speed, cadence and power – no external sensors needed
- 20 lb precision balanced flywheel
- Integrated dual ANT+ FE-C and Bluetooth FTMS standards
- Built-in front wheel block
- Integrated carrying handle
- Compatible with Shimano 8-11 speed cassettes
- XD/XDR freehubs sold separately (link)
- Thru-axle compatible for bike frames with fork widths of 142 or 148.
- Quick-release compatible for bike frames with fork widths of 130mm and 135 mm.
- Compatible with a wide variety of devices and indoor cycling applications, including Rouvy, Zwift, TrainerRoad and many more. Contact us with questions about compatibility with other software.
- Headless mode (powered on, not paired to any apps) lets you ride with a progressive resistance curve that matches the Fluid2 (link).
- LED indicator lights communicate connectivity and more.
- Direct drive design directly connects the bicycle to the resistance unit, eliminating tire wear.
- Internal cooling technology ensures accurate ride data even during the hardest of workouts.
- Folding legs provide widest footprint of direct drive indoor bicycle trainers on the market for added stability and easy storage.
- Accessible and balanced handle allows for smooth, anyone-can-carry transit of the trainer.
- Over the air (OTA) firmware updates and calibration via the Saris app (link to firmware page)
- Maximum weight (rider and bike): 300 lbs.
- Dimensions when Open L*H*W: 31x18.5x19.5 inches (787.4x469.9x495.3 mm).
- Dimensions when Closed L*H*W: 8.5x18.5x19.5 inches (76.2x469.9x495.3 mm).
- Weight: 47 lb. (21.3 kg).
- Cassette sold separately.
$69.95
148 x 1.75 mm pitch axle adapts a thru axle hub bike to fit a Saris bike trainer.
- Trainer Thru Axle Adapter For Saris Trainers
- Thread pitch: 1.75 mm
What's Included:
- Thru axle 148 mm
- Washers
- Endcaps with bolts
Trainer Compatibility
The Saris Trainer Thru Axle Adapter is designed for indoor use on Saris trainers and should not be ridden outdoors. Compatible with current basic trainers. Not compatible with CycleOps PowerSync trainers. Contact us with trainer compatibility questions.
Bike Compatibility
Many bike manufacturers do not publish thread pitch or hub spacing online. If you are unclear as to what type of thru axle your bike uses, please contact us.
$49.95
$69.95
29% Off
1.5 mm thread pitch TRAINER THRU AXLE ADAPTER FOR SARIS (AND SOME OTHER) TRAINERS
WHAT'S INCLUDED:
- Thru axle
- Washers
- Endcaps with bolts
- The 148x12mm adapters also come with a shorter bolt action slider tube.
TRAINER COMPATIBILITY
The Saris Trainer Thru Axle Adapter is designed for indoor use on Saris trainers only and should not be ridden outdoors. Compatible with current basic trainers. Not compatible with CycleOps PowerSync trainers. Contact us with trainer compatibility questions.
BIKE COMPATIBILITY: 1.5 mm pitch only
Many bike manufacturers do not publish thread pitch or hub spacing online. If you are unclear as to what type of thru axle your bike uses, please reach out to your local bike shop or the bicycle manufacturer directly. Both 148x12 Thru Axle Adapters are compatible for both 142 and 148mm bikes.
148x12 Thru Axle Adapter, 1.5 Thread Pitch (9733T) works for:
- 148 x 12mm
- 142 x 12mm
- 1.5 thread pitch ONLY
$107.00
Our Trainer Axle is designed to adapt your thru-axle equipped bike to on-wheel trainers, such as a 1up, Blackburn, Cyclops, Kinetic, Tacx, Wahoo, and many others. Our goal is to fit the thru-axle to your bike perfectly to minimize spacers and extra parts, providing a clean, high-performance axle for your bike. Train, warm up, and be race ready and fit for the season.
- When it’s time for your race or time to head outside, simply remove your bike from the trainer, remove the drive side axle end and go. Our axle is suitable for use on or off the trainer, indoors or out.
- The axle shaft and axle ends are precision CNC-machined from 7075 aluminum and hard-anodized for rugged durability.
- No special tools required. Design allows for installation or wheel removal using your standard 5mm hex wrench.
- Designed, built, and quality tested in the USA. Proven around the world.
Important: Before you order, make sure your specific trainer will accommodate the width of your modern thru-axle-equipped bike. Measure your trainer at the widest setting and measure the outside width of your bike frame. Our the trainer axle ends will extend past your frame on each side.
$74.99 - $79.99
Kurt Kinetic's 12mm Traxle Through-Axle lets you attach your mountain bike to a Kinetic trainer without changing the original skewer.
The Kinetic Traxle comes in 3 thread pitches:
- T-2101 Coarse: M12 x 1.75mm
- T-2102 Medium: M12 x 1.5
- T-2100 Fine: M12 x 1.00mm (Fine XL has the same thread pitch and is a longer version of the fine Traxle)
$115.00
If you're really serious about your trainer sessions, check out Kurt Kinetic's Pro Flywheel. It attaches quickly and easily to your Road Machine or Rock and Roll flywheel (sold separately) for a total of 18 pounds. It takes your Kurt Kinetic trainer's already stellar real-road feel and ups the realism, which is a must for hard-core endurance workouts, like tempo and long distance rides. You'll also experience longer wind-ups when doing sprint intervals and a longer coast-downs.
$49.99
Kinetic's Riser Ring lets you level your bike when you're riding on your trainer. Plus, there are 3 other steps that let you simulate climbing by elevating the front wheel. The Riser Ring is simple to use and stable for excellent support.
- Designed for the following Kinetic trainers: the Road Machine, Magnetic, and Cyclone
$89.95
Get the natural feel of riding outside when you use Kurt Kinetic's Turntable Riser Ring in conjunction with Kurt Kinetic's Rock and Roll trainer (sold separately). The Turntable Riser Ring elevates your front wheel so you get a more natural riding position, and thanks to the swiveling base, you can use your most natural pedal stroke.
$799.99
The Elite Direto XR-T is the home trainer you've been seeking for your indoor training this season. This trainer is the biggest evolution of the Elite Direto trainers, featuring an integrated power meter. It is ideal for reaching the highest level of performance and working out in a totally immersive home training experience.
- Just like Suito, the Direto XR-T trainer will help you work out on your bike in the easiest and quickest fashion since the first unboxing.
- Very stable, Direto XR-T folds quickly for storage when not in use and features a practical integrated handle that makes it easier to carry it with you.
- The Direto XR-T is a direct-drive home trainer, meaning that it is one of the quietest home trainers on the market.
Integrated power meter
- The OTS (Optical Torque Sensor) ensures Direto XR-T the greatest data accuracy while you're training. This is an innovative integrated power meter for the home trainer to measure power output with to within 1.5% error, 0.5% less error tolerant than the original Direto trainer.
- The Elite Direto XR-T is the only home trainer in the world, along with the original Drivo, Drivo II, Direto, and Direto X trainers, to actually measure your power output via an integrated power meter. That's why it sets itself apart as one of the most accurate home trainers on the market.
Incredible slope simulation
- The Direto XR-T is an interactive home trainer, so it automatically varies resistance during your training. With an upgraded and bigger flywheel, the Direto XR-T is able to simulate up to an incredible 24% slope gradient—10% more than what the original Direto could do and 6% more than the Direto X.
- This unprecedented power level ensures excellent performances even during particularly intense training sessions—you'll be able the check out all your training charts at a glance, conduct tests to evaluate your fitness level, do reps and high-speed sprints at max power.
- Any type of training you want is available to you riding on the Direto XR-T.
Super compatible
- The Elite Direto XR-T ensures total compatibility with both road and MTB bicycles, making it one of the most compatible trainer on the market.
- This trainer features a new structure which is perfect to house derailleurs with long cages that feature greater capacity on bigger 12-speed sprocket sets. This is how the Direto XR-T is compatible with 9/10/11 speed Shimano/SRAM, 9/10/11/12 speed Campagnolo, 12 speed SRAM NX and 12 speed Shimano Micro Spline cassettes. Cassette sold separately.
Total Interactivity
- Direto XR-T is counted among the new generation of ANT+ FE-C & Bluetooth interactive home trainers that are compatible with any kind of app, software, computer, or device (smartphones and tablets) that support iOS, Android, OSX, or Windows.
- Set your course or training programs with a few clicks and start pedaling right away. Direto XR-T will automatically adjust resistance and manage your training session.
- Direto XR-T can be managed via the My E-Training software & app (12-month free subscription included) or other indoor cycling services, such as: Zwift, TrainerRoad, The Sufferfest, Bkool, Kinomap and many more.
$269.99
Top resistance unit, innovative frame: excellence renewed
- 8 resistance levels adjustable by a practical selector on the handlebar.
- Use the Misuro B+ sensor for compatibility with the My E-Training or third party apps.
Tech info
- Novo frame: integration of steel and technological plastic materials.
- Magnetic resistance unit, very compact.
- Maximum stability at high speeds or at maximum effort guaranteed by the absorbing structure of the frame.
- Lifting of the bicycle is limited to the minimum.
- Fast fixing system: the bicycle can be clamped and released with a single quick operation.
- New adjustable support system, allowing an adequate and constant pressure between the roller and tire.
- 30 mm diameter elastogel roller.
- The training roller folds up easily and becomes compact for easy transport or storage when not in use.
- Adapts to all wheels from 24" to 29".
$89.99
The Elite Smart Sterzo riser block allows steering up to 34 deg while riding your rear wheel trainer while using ANT and Bluetooth communication protocol, interacts with compatible apps to give you the most realistic indoor ride. It’s rotating pivot features a practical automatic return system for you to easily get the handlebar back to its original position.
Compatible with tires up to 56mm wide
$49.95
The Elite Thru Axle adapter kit makes Elite trainers compatible with bicycles with 10mm to 12mm diameter through bolts on the rear wheel (lengths from 130mm to 148mm boost). Easy to set up to start right away with your training, this Thru Axle adapter is made from quality material to ensure an immediate setup and great protection to the threads of your bicycle frame. This unit does it all!
$158.99
- Replacement freehub body compatible with Neo 2T (T2875.60), Flux S (T2900S.60 A), Flux 2 (T2980.60 A) direct drive trainers
- NOT compatible with older generation Neo (T2800), Neo 2 (T2850/T2850.60), Flux (T2900), Flux S (T2900S/T2900S.60) and Flux 2 (T2980/T2980.60)
$159.99
Is riding on the rollers a difficult or tense activity for you? Choose for extra safety with this bike support. You secure the front of your bike so that you can ride the distance you want without any worries.
- The bike support is only suitable for the Tacx Galaxia and Antares.
- Offers you greater safety
$399.99
The Galaxia is an advanced roller. The patented swing system allows it to absorb the forward and backward accelerations perfectly, ensuring that you do not ride off the rollers. The Galaxia can be retracted to 80 cm.
Patented Swing System
The Galaxia relies on a swing system that ensures the rollers can swing forward and backward. When you start to sprint, switch pace fast, or stand on the pedals, this system absorbs the sudden forward or backward movement so you do not derail.
Conical Rollers
The Tacx rollers are conical which ensures that your bike always remains in the middle of the roller while you are riding. This makes riding on the rollers easier and safer.
Retractable
The Tacx rollers are retractable to 80cm
FEATURES
Type of trainer: Roller
Roller diameter: 100-110mm (3.93-4.33in)
Suitable bikes: All bikes with a wheel diameter of 26 to 29 in
SPECIFICATIONS
Max. footprint (lxw): 1350×500mm(53×19.7 in)
Height: 135 mm (5.31 in)
Dimensions when folded: 800 × 500 × 135 mm (31.5 × 19.7 × 5.31 in)
Weight: 8.2 kg (18.1 lbs)
Article number: T1100
$1,699.99
- This is not a complete trainer
- Replacement resistance unit only
$39.99
A sweat cover with a pocket for your smartphone. The sweat cover protects your bike against perspiration and enables the use of a phone while training. The Tacx sweat cover is made from absorbent textile to catch and retain perspiration. Its clever design fits all bikes and enables easy mounting. Suitable for a variety of phone sizes - max. length 138mm, max. width 68mm.
$229.99
Take your ride inside with Tacx Boost. You won't need external power to use this trainer, thanks to a forceful magnetic brake that allows you to directly apply resistance or lighten it. Resistance can be controlled with a lever on the handlebar. The setup is easy—with just two simple clicks you mount your bike and you are ready to ride.
The Boost bundle includes a speed sensor so you can track how far and how fast you're riding indoors and train with your favorite app.
SIMPLE SETUP
With just two simple clicks, you'll be ready to ride.
SMALL BUT STABLE
This indoor trainer has a small footprint, 675 x 650 mm (26.6" x 25.6"), but provides a sturdy ride.
EASY TO STORE
Multifunctional front wheel support serves as a handle to carry the trainer and ensures a natural cycling position.
MAGNETIC BRAKE
You won't need external power to use this trainer, thanks to a forceful magnetic brake that allows you to directly apply resistance or lighten it.
RESISTANCE CONTROL
A simple lever on your handlebar lets you control the resistance; 10 levels, up to 1,050 watts.
REALISTIC RIDE FEEL
An actual flywheel generates a realistic and smooth pedal stroke.
SMOOTH AND QUIET
The closed resistance unit reduces noise and makes for a smoother ride.
FEATURES
- Type of trainer: Basic Smart trainer with magnetic brake
- Virtual Power: Virtual Power
- Magnets: 2x8 Permanent ferrite magnets
- Transmission: Roller, 30 mm
- Electrical requirements: No voltage required
- Power indicator: None
- Connection indicator (ANT/BT): None
- Firmware upgradable: No
- Suitable bikes: Road, Tri, & MTB with skewer quick release
- Supplied with: Front wheel support, quick release for road bikes and mountain bikes (5mm)
SPECIFICATIONS
- Max. power (40 km/h): 1050 Watt
- Simulation of descent: No
- Max. torque: 17 Nm
- Max. brake force: 50 N
- Flywheel: Actual of 1.6 kg
- Mass inertia: 9.18 kg (20.2 lbs)
- Footprint (LxW): 675 x 650 mm (26.6 x 25.6 in)
- Height: 410 mm (16.1 in)
- Dimensions when folded: 565 x 410 x 245 mm (22.2 x 16.1 x 9.65 in)
- Weight: 8.53 kg (18.8 lbs)
DATA OUTPUT AND CONTROL
- Wireless communication: ANT+ & Bluetooth
- Control by: Handlebar resistance lever with 10 positions
- Output: Speed
- Read out on: Bike computer, Computer with ANT+ antenna, Smartphone, Sports watch, Tablet
- Trainer Type: Basic, Manual, Wheel-on, Wheel-on
- Features: Smooth ride feel, Silent, Powerful, Manual resistance control, Enables virtual power, Handlebar lever, Dual material roll, Resistance roll 30 mm, Actual flywheel, Foldable, Easy to carry, Easy to set-up, Suitable for power workouts, Suitable for interval training
- Positions: 10
- Suitable axles: Width of rear fork: Road 130 mm, MTB 135 mm. Adapters for other widths available
Page 1 of 2
Next page