Parts & Accessories
Body Geometry Footbeds are ergonomically designed and scientifically tested to increase power, endurance, and comfort by optimizing hip, knee, and foot alignment. With three different arch support options (Red+ being the lowest, Blue++ being in the middle, and Green+++ being tallest), you can be sure that every precious watt is preserved through the pedal stroke. - Body Geometry Footbeds measurably increase power, reduce time to exhaustion, and reduce injury by aligning hip, knee, and foot. - Customized longitudinal arch and metatarsal support with Red+, Blue++, or Green+++ contour. - Proprietary lightweight foam avoids taking a compression set for long-lasting performance. - Combine Body Geometry shoes, footbeds, and wedges to maximize performance benefits.
Allows simple, removable, in-shoe adjustment to the forefoot varus/valgus angle for optimum foot, knee, and hip alignment. - Reversible shims work for right or left application - Vented for comfort - Package includes two varus shims (orange) or two valgus shims (yellow), based on selection
Replacement SL and SL2 shoe buckles, sold in pairs. - Sold in pairs - SL buckles for 2012 and prior shoes - SL2 buckles for 2013 and newer shoes - Low-profile - Replaces without tools
$17.00 - $21.00
Your cycling shoes thanklessly accompany you through the toughest intervals in nature's worst conditions. Thank them and keep them ticking along with Specialized's Replacement Heel Lugs. These lugs replace the worn-out tread on your S-Works and Pro model road shoes. - Fits 2012 and earlier S-Works shoes - Fits all Pro Road shoes - Heel lug only - Sold in pairs; includes screws
$64.99 - $74.99
Offering multi-season protection from the elements, the FS260-Pro Slick Overshoe II comes in a compact and lightweight construction. - High stretch waterproof PU upper - Open sole design with durable toe panel and instep crank rub protection - Deep elastic cuff with silicone gripper - Offset rear zipper access with snap-down puller - Reflective print twin stripes on the rear
Flat Pedal Friendly Mud Protection - Super tough, nylon faced neoprene upper with highly durable overlays - Novel, hardwearing rubber open sole for flat or clipless pedals - Aggressive rubber toe section tread for added grip - Rear Velcro closure with fit adjustment - Wide fit, suitable for varied MTB flat pedal and clipless shoes - Reflective trim - Clean shoes, clean lines, muddy trails - Tight fit = clean shoes - Due to the variety of shoe profiles check compatibility with your shoe by trying on before buying
Designed to be abused and then re-used, the MT500 Plus Overshoe II uses super tough nylon faced neoprene with durable overlays in high wear areas and a hard-wearing rubber sole that is compatible with wide fit flat pedal and clipless MTB shoes. The front toe section incorporates aggressive, lugged tread to ensure that you don’t lose any of that vital traction needed to push back up the trail. - Super tough, nylon faced neoprene upper with highly durable overlays - Exclusive, hardwearing rubber open sole for flat or clipless pedals - Aggressive rubber toe section for added grip - Rear double Velcro closure with fit adjustment - Wide fit, suitable for varied MTB flat pedal and clipless shoes - Clean shoes, clean lines, muddy trails - Due to the variety of shoe profiles check compatibility with your shoe by trying on before buying
If you've never experienced the pain of riding with ice blocks for feet, consider yourself lucky. For the rest of us, however, it's a feeling that we'd be happy to never experience again. But without pieces like our Element Toe Covers, history is doomed to repeat itself this winter. Soft Shell fabrics are synonymous with unrivaled protection and quality and this is for a good reason. It provides amazing levels of wind and water resistance, without sacrificing anything to breathability. This means that your toes are going to stay warm and protected, not wet and clammy. And with abrasion resistance at key points of the construction, you'll be receiving these warming advantages for seasons to come. - Abrasion-resistant bottom and toe panels increase the covers' lifespan. - Fabric Content: Knit 44% Polyester, 38% Nylon, 14% Elastane, 4% PU. - Soft Shell fabric provides resistance to both wind and water, without sacrificing anything to breathability, comfort, or layering ability. - Universal cleat opening means that the covers are compatible with both road and mountain shoes.
- Hyper Green and Black is paired with unique reflective trims to drastically increase your visibility to motorists 24-hours a day. - Anti-abrasion knitted yarn was used to provide long-term durability. - Reflective band across the top increases your visibilty to motorists in low-light conditions. - Made for riding in transitional weather. - Two-hole cutout on the sole makes it compatible with road shoe cleats and walking pads.
IP1-Snap Boa® cartridge assembly for Expert Road and Women's Zante Road shoes. - Includes one cartridge dial assembly and lace. - Left- and Right-specific. - Not for resale, for warranty replacement
L6 Boa assembly for all Specialized L6-equipped shoes.
Comfortable elasticized shoe cover with rear zipper. - Made of elasticized Elastane for great comfort. Elastic band on the top opening and rear zipper - Reflective tape on the rear part, lateral S-logo print. - European sizes S (35-37) M(38-40) L(41-43) XL (44-46)
We all have our tricks for successful cold-weather riding. Want to know ours? Neoprene Shoe Covers. Made for cold, wet, and windy days on the bike, stretchy neoprene and fully taped seams help keep feet dry and comfortable mile after mile. Whether you’re suiting up for a gravel adventure or a road ride, the universal cleat opening makes it easy to pull on over your preferred cycling shoe type. Abrasion-resistant panels in high-wear areas add durability. - Abrasion-resistant toe and heel sole with universal welted hook-and-loop closure, so covers are compatible with both road and mountain shoes. - Fabric Content: 100% Polyester
Windy descent. Sudden downpour. Cold, high-elevation climb. Whatever the ride throws your way, our Neoprene Tall Shoe Covers keep feet comfortably pedaling onward. Stretchy high-cut neoprene and fully taped seams keep feet dry and protected in wet and windy conditions. Gravel or road ride, the universal cleat opening accommodates your preferred shoe type. For added durability, abrasion-resistant panels are strategically placed in high-wear areas to ensure these overshoes hold up year after year. - Fully taped seams prevent water intrusion to keep you dry and protected in wet conditions. - Zipperless construction for a comfortable fit around your ankles. - Abrasion-resistant toe and heel sole with universal welted hook-and-loop closure, so covers are compatible with both road and mountain shoes. - Fabric Content: 100% Polyester
If you've never experienced the pain of riding with ice blocks for feet, consider yourself lucky. For the rest of us, however, it's a feeling that we'd be happy to never experience again. But without pieces like our Neoprene Toe Covers, history is doomed to repeat itself this winter. - Abrasion-resistant bottom and toe panels increase the covers' lifespan. - Universal cleat opening means that the covers are compatible with both road and mountain shoes. - Fabric Content: 100% Neoprene
A little cold or windy weather in the forecast? No problem. When full shoe covers are overkill, pull on our Neoprene Toe Covers for just the right amount of warmth and protection. Perfect for short winter rides or longer shoulder season excursions, the stretchy, weather-resistant design is compatible with all cleat types. Abrasion-resistant panels add durability, so feet stay comfortable ride after ride. - Abrasion-resistant bottom and toe panels increase the covers' lifespan. - Universal cleat opening means covers are compatible with both road and mountain shoes. - Fabric Content: 100% Polyester
Your road shoes weren't made for walking, but that's just what you did. We can't blame you, though, especially when installing a Replacement Road shoe Heel Lug is so darn easy. Just install these on your S-Works Road shoes (2012 and earlier), and feel the tread under your feet again. - Replacement tread for S-Works 6 and Sub6 - Heel Lugs Only - Sold in pairs; with screws
Replacement tread for S-Works 7 Road shoes. - Heel Lugs only. - Sold in pairs with screws.
Replacement Ti/Alloy T-Nuts for the S-Works 6 and S-Works Sub6 road shoes.
Replacement Boa® Snap 3 dials for S-Works 7 Road shoes. - Includes one cartridge dial assemble and lace. - Left- and right-specific.
Stripped, worn-out—whatever happened to your three-hole cleat attachment is between you and your shoes…or maybe between your shoes and your cleats. Either way, Specialized has a T-Nut replacement kit that's easy to install and even easier than buying a new pair of shoes.
Improve traction in the worst conditions with aggressive toe studs. Ideal for CX racing or Mountain riding in snow, ice, mud or even just hard pack dirt. - 15mm length is longer than standard - Durable stainless steel is engineered for long-lasting wear - Precision threads are compatible with most off-road cycling shoes. - Original equipment for some S-Works XC. - Packaged as 5pc, so you have a spare.
- 100% reflective outer-facing panelling - Designed to be worn only with cycling shoes that have cleats - Waterproof and windproof PU coated fleece - Offset waterproof lock-zipper, heel loop, calf hook & loop adjustor and open sole - Reinforced toe and heel to be worn with cycling shoes
Giro's Knit Shoe Covers add just a touch of extra warmth, protect your shoes from winter road grime, and light up the night with visibility-enhancing reflective ankle stripes. Cordura knit fabric is tough as nails and will stand up to enthusiastic use. Details: When it comes to your cycling shoes, a little protection can go a long way. The Knit Shoe Cover is a reliable, lightweight option that you're sure to appreciate when temps drop. In addition to protecting your cycling shoes from road grime, the Knit Shoe Cover adds a touch of warmth for transition weather and help keep you lit up at night with reflective ankle cuff thread.
Stay insulated and protected on the trail The water- and wind-resistant neoprene exterior of the Proof™ MTB Winter Shoe Covers are optimized with flex zones in key areas and engineered from a super-stretch neoprene that minimizes bulky feel without compromising warmth. The sole includes a molded rubber bottom to help improve traction and durability when worn over mountain bike shoes. Reflective detailing and locking zipper are the finishing details in this essential winter off-road shoe cover. Compatible with most mountain bike shoes. Sizing: · S 37 - 39 · M 39 - 42 · L 42 - 46 · XL 46 - 50 Details: · Water-resistant neoprene fabric · Super-stretch neoprene flex zones at ankle · YKK™ locking zipper · Reflective highlights · Durable walking pads · 20 to 45F / -6 to 7C
The replacement heel pad is for all EC90 SLX, EC90 ACC and EC70 outsoles. These outsoles are found on Empire SLX, Empire ACC, Factor ACC, Factress ACC, Trans E70 and Espada E70 shoes. The kit comes with left and right replacement pads and includes hardware.
These replacement walking pads are easy to install, and bring your shoes back to original spec, so you can keep on movin'. These replacement walking and heel pads integrate with the Republic LX, Republic, Civila, Territory and Reveille shoes, and the kit comes with full left and right replacement pads and includes hardware.
The X-Static Supernatural Insoles Fit Kit delivers customizable arch support for a better feel. Two cycling-specific footbeds and three interchangeable sets of arch inserts, ranging from small to large sizes, fit together without the need for tools.
The waterproof, seamless Xnetic H2O Shoe Covers have enough warmth and durability for you to stay comfortable when the temperatures freeze but the need to ride burns. Waterproof, breathable protection without excess bulk or stiffness. The Xnetic H2O shoe cover brings waterproof performance, seamless construction, and breathable fibers together for the highest level of flexibility available. The unique three-layer composition fuses our RainGuard membrane between a durable nylon outer shell and hypoallergenic liner, for use in wet weather and temperatures that dip towards freezing.
The FS260-Pro Nemo Overshoes help keep your feet warm on even some of the coolest, dampest days. Superstretch neoprene is used to ensure a snug fit over your shoes. A stretchy, abrasion-resistant sole and hard-wearing aramid stitching make this an overshoe that can be used time and time again. - High-stretch fabrics provide zipperless access - Superstretch waterproof thermal neoprene upper - MTB and road cleat compatible sole - Stretch abrasion-resistant sole/heel - Hard-wearing stitching using aramid thread - Reflective trim
Page 1 of 2 Next page