Your Search: "lock"

The buyer's choice for wheel builders looking to save weight. ProLock nipples contain a special adhesive compound (by Loctite) which is activated when a spoke is threaded into the nipple, forming a durable bond. - 32 nipples weigh approximately 30 grams

The buyer's choice for wheel builders looking to save weight. ProLock nipples contain a special adhesive compound (by Loctite) which is activated when a spoke is threaded into the nipple, forming a durable bond. - Weight: starting at 20g for 64 nipples

Replacement GPS mount insert for the Direct X-Lock Mount System and the Alloy CNC Forward Mount.

The Curve Sole Measurement Tool works in conjunction with the flat sole shims to correct the radius of flat sole shoes and prevent unwanted squeaking. There are 4 radius measurements, one per side, that measure the sole and indicate whether a shim is needed or not.

The KryptoFlex 525 Seatsaver Cable is a 2.5-foot cable ideal for securing your bike's seat and seatpost. It's 5mm braided steel cable provides increased cut resistance and the vinyl coating protects bikes and equipment from scratches. The KryptoFlex 525 cable is 3/16-inch x 2.5-feet.

Big vibration-dampening blocks offer comfort and enhanced grip. - Diamond pattern inner ring provides enhanced control - OD: 31mm - Length: 130mm

- Disc rotor lockrings to securely mount Center Lock rotors - Available for standard or oversize QR or thru-axle hubs

The OTTO Mount is an accessory for on-the-bike carry of OTTOLOCK. It's made of flexible silicone and has four ladder-strap hooks to ensure a snug, secure fit for multiple places on your bike. Note: Make sure all four hooks are engaged with your OTTO Mount ladder strap, and you position the OTTOLOCK head weight near the clamp to ensure you do not lose your OTTOLOCK. - Recommended for the 18" OTTOLOCK only - Flexible inner fit-up diameter accommodates 1 – 2" (25 – 51cm) round bicycle tubes - Material: silicone

The small and handy RR-12.2 Tape Measure features a tough composite housing with an integrated belt clip and both metric and SAE readings up to 350 centimeters or 12 feet. Measurement can be locked in place using the thumb lock or the handy quick-stop button. - RR-12.2 features a new body design with a handy-quick stop button on the bottom, allowing the user to temporarily lock the tape into place with their index finger - Maximum length: 350 cm | 12 ft. - Markings: 1 mm | 1/32" (up to 6") | 1/16" (over 6") - The RR-12.2 features a new body design with a handy-quick stop button on the bottom, allowing the user to temporarily lock the tape into place with their index finger - Metric and SAE readings up to 350 centimeters or 12 feet - Markings: 1 mm | 1/32" (up to 6") | 1/16" (over 6")

- Stable 2-Stay mount - Made of steel

Ultra-lightweight lockable security tie with reinforced steel core. Z LOK’s unique double-ratchet design fastens while locking, providing super-convenient added protection for use on car racks, with accessories and other outdoor equipment.

Lock your bike's quick-release components with Kryptonite's 4-foot long Keeper 512 Combination Cable. It's a 5mm braided steel cable that offers increased cut resistance and features a pre-set combination closure. The vinyl coating protects bikes and equipment from scratches, too.

The KryptoFlex 1004 Double Loop Cable is a 3/8-inch braided steel cable providing increased cut resistance. The double loops are for use with U-locks, disc locks and padlocks. The vinyl coating protects bikes and equipment from scratches. It includes the Hook-n-Loop strap for easy carrying. The KryptoFlex 1004 Looped Cable is 3/8-inch x 4-feet.

The same spoke thread treatment used by Stan's pro wheel builders is now available to everyone. Stan's SRD Spoke Powder fills the threads of the spoke and functions as both a lubricant during assembly and a thread lock once built. Each bottle contains 24g (.8oz) which will treat approximately 300 wheels. The PTFE powder in Stan's SRD Spoke Powder acts as a barrier, keeping the metal of the nipple from bonding to the metal of the spoke and preventing spoke wind up during build or adjustment. In promoting a smoother turning nipple, the powder also ensures more accurate and consistent wheel builds, with less “ping and pop" during and after the build. The powder also fills the threads of the spoke to act as a thread lock that prevents loosening and de-tensioning and is particularly well suited for mechanically locking nipples such as Sapim's Secure Lock. - Improves tension consistency and overall build quality - Prevents spoke wind up - Offers secure thread lock between spoke and nipple - Prevents corrosion between spoke and nipple - Can be used dry or as a slurry - Works great with mechanically locking nipples

ABUS' Cobra Cable is made of strong, flexible, 10mm-thick steel to keep your bike safe, while its soft, durable coating protects your bike's finish. Plus, its looped ends make attaching your favorite lock (sold separately) a snap.

This bracket is for convenient carrying of U-shackle locks - Mounts on round frames with a diameter of 28 - 36mm - Includes screws in two different lengths - Plastic bracket for mounting with rubber inlays for a secure hold - Index marks on the bracket to simplify subsequent mountings - Comfortable one-hand operation - Very quick mounting

This mounting bracket is for transporting Steel-O-Flex, cable, and coil cable locks. - Enables transporting the lock on the seat post, on the frame, or on the rack stays - Compatible with frame diameters of 15 - 55mm - Simple mounting without tools

Design Philosophy: -The absolute best of both worlds, the BaaBaa Merino Winter Sock combines the great insulative and odour controlling properties of merino and the excellent moisture management properties of synthetic fibres, keeping your feet warm and comfortable throughout your ride. Key Benefits: -Merino blend for soft, itch-free comfort -High warmth to weight ratio even when wet -Stretch arch support -Long cuff for extra warmth -Easycare machine wash -Single pack

Design Philosophy: -The absolute best of both worlds, the BaaBaa Merino Winter Sock combines the great insulative and odour controlling properties of merino and the excellent moisture management properties of synethic fibres, keeping your feet warm and comfortable throughout your ride. Key Benefits: -Merino blend for soft, itch-free comfort -High warmth to weight ratio even when wet -Stretch arch support -Long cuff for extra warmth -Easycare machine wash -Padded sole for extra comfort -Single pack

Hard-working, pedal pushing feet deserve comfort. Treat your feet with the Comp Racer Sock. They're made with Meryl Skinlife construction, so moisture management is under control. The comp racer sock has comfort, color, and style to give hard-working feet what they need. The Comp Racer Sock is soft and unbelievably comfortable, yet durable enough for the toughest riding. Made with Meryl Skinlife fibers, it offers superior moisture management and fit to help maintain your foot's comfort.

The KEO cleat covers are designed to protect your KEO cleats while walking. Compatible with KEO GRIP and KEO CLEAT, these covers lengthen the life of your cleats and improve safety when walking thanks to an anti-slip surface. - Compatibility: KEO Grip/KEO Cleat - Use: Protect the cleat

The Keo Spacer adaptors are slim wedges that fit between the shoe and the cleat. They aim to avoid the unpleasant creaking sound provoked by contact between the sole and the cleat, which can arise in particular with flat-soled shoes. Delivered with 2 spacers and 6 screws for quick and easy installation.

Wera ZyklopT-handle for higher torque transfer. For 3/8" square sockets with ball lock. Adjustable drive for more flexible usage. - 3/8" Zyklop T-handle with adjustable drive - For 3/8" square sockets with ball lock - High-quality chrome vanadium steel, matte chrome-plated - For higher torque transfer

If you wanna speed up your game then you need to get ahold of SupaSox. These woven pieces of art are not only pleasing to the eye, but also have superior performance. SupaSox are smooth and easy to put on, fitting extremely snug yet breathable. The wicking technology keeps your feet dry and cool in all conditions. - Crew Height - Snug and Breathable - Wicking Technology

The Comp Racer High Rise sets you up with a modern 6" cuff design that's made from premium fibers to wick moisture away and help keep your feet dry and comfortable. With the high rise cuffs, we've taken classic cycling performance and modernized the style making the Comp Racer High Rise Sock favorites of road racers and trail riders alike. Put on a fresh pair for the ride into school or work and when you get there, swap in a stylish option to match your get-up for the day.

The KryptoFlex 1007 Double Loop Cable is a 3/8-inch braided steel cable providing increased cut resistance. The double loops are for use with U-locks, disc locks and padlocks (sold separately). The vinyl coating protects bikes and equipment from scratches. It includes the Hook-n-Loop strap for easy carrying. The KryptoFlex 1007 Looped Cable is 3/8-inch x 7-feet.

- Medium-duty steel ball lock - Paint protecting thick vinyl coating - Resettable Combination - Mounting bracket included

Mid-weight merino wool blend provides warmth and great moisture management in this versatile sock that every kind of rider can appreciate in cool weather. The Seasonal Merino Wool Sock combines a modern 6" cuff length for style with the warm feel and amazing comfort that only wool can provide in varying conditions. It's thin enough to get a precise fit inside your cycling shoe, yet durable enough to wear on and off-road. Plus, it's also naturally resistant to odors and helps to wick moisture away from your skin. - Nylon-reinforced toe and heel with high-rise 6" cuff - Seasonal-weight merino wool blend - 70% merino wool - 15% polyester - 10% lycra - 5% elastic

The DELTA standard requires a rotational movement of the foot toward the outside or inside for disengagement. This function improves cyclist's safety; no body or bearing prevents disengagement toward the inside. Compatible with non-KEO LOOK pedals, their contact area is wide for optimal comfort. They also feature a memory positioner to aid when changing cleats. - Use: Road & Indoor Bike - Material: Polyacetal + PTFE - Lateral adjustment: 4mm - Longitudinal adjustment: 12mm - Weight (pair + fasteners): 75g

SKS stands for "Same Key System." These types of cores enable you to lock all your Yakima products with just one key. When replacing a core on your Yakima product, you may need a Control key to remove your existing unlocked core so you can transfer the core to a different Yakima product.