Grips

Gel rubber construction for the optimum balance of comfort and durability. - Diamond pattern provides excellent grip - 90mm length

Gel rubber construction for the optimum balance of comfort and durability. - Diamond pattern provides excellent grip

Big vibration-dampening blocks offer comfort and enhanced grip. - Diamond pattern inner ring provides enhanced control - OD: 31mm - Length: 130mm

Ultra tacky rubber construction for maximum grip. - Inner raised diamond pattern for maximum grip, outer waffle pattern for shock absorption - Medium flange - Reinforced end to resist impacts

60g per pair with end caps - 130mm long - 32mm OD

Ergonomic shape relieves nerve pressure for optimum comfort. - Gel rubber construction offers excellent durability - Diamond pattern provides excellent grip - Inner lock-down clamp for ultra quick and secure installation

Gel rubber construction for the optimum balance of comfort and durability. - Waffle grip pattern provides excellent grip and vibration dampening - Flange provides added contact enhancing control - Flange cut-away provides shifter and thumb clearance - OD: 30mm - Length: 135mm

Luxurious EVA foam. - Excellent OEM replacement - With adhesive backing - 210 x 3cm - Black screw-in end plugs included - A whole spectrum of color options

Plush, high grip, perforated polymer tape - 210 x 3cm - Waffle texture with super gel - Adhesive backed - Black screw-in end plugs included

The Denim Cox signature Grime Grip features a traditional mushroom pattern in the super soft sticky Krayton rubber that you've come to expect from BSD. The design has reinforced slime at the ends for extra durability and a debossed Grime skull with missing teeth, just like Denim... - Flangeless mushroom design made from soft Krayton rubber - Forever bar ends with washers

Leezy was cutting the inner flange off his Paley Slims so that the mushroom part of the grip went right to the end. His reason being that that it was comfier to catch barspins on. BSD designed the new Leezus Handles around that idea, coupled with their new softer stickier compound these slim grips feel as good as they look.

Simple mushroom style design made of Krayton rubber. - Flangeless slim mushroom design - Bar ends included

Dan Paley signature grips: Dan Paley is really fussy when it comes to grips, not too fat, not too thin, not too squishy, the list goes on. The Dan Paley Slims however are just right. - Flangeless Dan Paley zigzag design - Krayton rubber - Bar ends included

Single aluminium clamp design with covered/hidden bolt - Dual-compound with soft grip area and harder endcaps for impact and scratch protection - Non-centric, offset-design. The grips are indeed round, but the rubber is thicker on the rear side, so we have around double the rubber thickness on the palm side - Cut-out inner sleeve for extra rubber thickness on the palm outside for even more extra padding and damping - Relief pattern on the outside palm area (rider facing) and on the fingertips area (front side) for feeling and grip - Weight: 113g /pr - Length: 140mm - Diameter (rubber part): 31mm - For handlebar diameter: 22.2mm

The Bartender, the Jagermeister of grips. No fuss rubber, lock on and rock out. The combination of a tacky rubber compound and the knurled pattern offers the bench mark in traction and durability. - Weight 90g - Single lock on - Low profile design - 30mm Diameter

"Make a grip with the fussiest rider on the planet, you must be mad!!" The Bartender Pro is the next level in grip design for Burgtec. We've collaborated with 3x World Champion Greg Minnaar to hone the construction of this grip to produce unrivaled vibration dampening. - 31.5mm Diameter. - 30A Rubber Compound - Single Lock On

The Goats Grip just went Super Soft. Prototyped through the 2020 season and based on the World Cup Winning pattern of the Bartender Pro as used by Greg, as well as Nina Hoffman, Danny Hart and Angel Suarez. - Super Soft Compound - 31.5mm Diameter - Single Lock-on - Tapered Core

Cinema Focus grips are proudly manufactured in the USA by none other than ODI, using ODI's superior rubber material. The flangeless design features a generous 160mm (6.3") width and super comfortable 30.5mm (1.2") diameter. Thin, mushroom-style ribs fold over to conform to your hand, making these grips super comfortable and grippy. The subtle offset octagonal profiles provide even more grip while still being ultra-thin and soft to give that perfect feel. Sold in pairs and include plug-style bar ends. - Length: 160mm - Diameter: 30.5mm - Bar ends: Plug Style - Weight: 3.3 oz

- Based on the classic mushroom design with smooth thumb wear patch - Kraton rubber with low flange and closed end

DEITY Grip Clamps offer a way to customize your bike to match your style.

The Knuckleduster features a tapered internal sleeve that you have to tap onto your handlebar for full engagement. This tapered sleeve feels like it is already locked into place once fully tapped onto the bar and coupled with a single bolt lock-on clamp, you will not develop any play. The body of the grip combines the best elements of a half-waffle, mushroom ribbing, and an ergo feel. Featuring a mushroom pattern to minimize vibration. The Knuckleduster grips are an all day grip that allow you to keep it Pinned Wide Open at all times.

Overwhelming demand for a diamond version of the Deity Knuckleduster lead us to the phenomenal feel of the Lockjaw.. With sweeping transitions from the padded thumb area to the deep dish diamond top pattern to a recessed half waffle, the Lockjaw delivers a technically precise feel from end to end. Utilizing TRC+ rubber compound allows us to maintain industry leading durability but delivered in a soft, plush and sticky durometer. By combining our tapered inner sleeve and single lock ring system coupled with our new extra grippy rubber and recessed half waffle, the Lockjaw gives you an extremely responsive feeling cockpit

- 31mm grip with micro diamond pattern - Kevlar infused TRC + rubber compound

- The thinnest DEITY grip to date - Featuring soft DEITY TRC+ rubber compound for durability and increased grip - Tapered inner sleeve to ensure perfect contact with the handlebar - Single clamp design with forward facing bolts that feature loc-tite - Lasered black ano 6061 T6 aluminum clamps - Seamless transition through the end of the grip for comfort and full range of control - Diamond pattern wraps around the end of the grip - 133.75mm length with a 30.5mm outer diameter - Not compatible with bar ends or plugs - Intended use: All MTN / Enduro / DJ / Slopestyle and DH - 96 grams for the set INSTALLATION TIP: To fully and properly install your SLIMFIT grip due to the tapered inner sleeve...make certain to whack the end of the grip 3 times with the palm of your hand until the grip fully seats onto the handlebar. If you find the fit is a bit tight due to your particular handlebar, a small amount of Isopropyl Alcohol can work wonders for lubrication. Finish the install by tightening the hardware to the specs listed on the packaging.

We've redeveloped our TRC+ rubber compound to deliver 33% more grip and cushion without compromising the amazing durability you've come to expect from all DEITY Grips. Rounding out our grip line to offer something for everyone, the SUPRACUSH Grip delivers the most comfortable and deeply cushioned grip on the market. It's the perfect grip for riders of any hand size looking for increased vibration damping, a larger feeling grip, or a more supple ride. Not only does the SUPRACUSH give you an unmatched level of cushion with our TRC+ rubber compound, but the larger deep-dish diamond pattern offers the most comfortable grip possible without compromising control, precision, or durability. - 34mm outer diameter with plush cushioning throughout - Deep-dish DEITY diamond pattern compresses for comfort but also provides traction - Features soft DEITY TRC+ rubber compound for exceptional durability and increased grip - Tapered inner sleeve to insure perfect contact with the handlebar - Single clamp design with forward-facing bolts that feature Loctite - Lasered black ano 6061 T6 aluminum clamps - Seamless transition through the end of the grip for comfort - Capped end for safety and comfort - 133mm length with 34mm outer diameter - Intended use: All MTN / Enduro / DJ / Slopestyle / DH / and any other riding style of choice - 118 grams for the set

This flangeless mushroom style grip is made in the USA by ODI grips using their super-soft rubber compound, which, combined with our specially designed rib profile, makes for a great-feeling and long-lasting grip. Includes our new USA-made Eclat nylon bar plugs. - Includes Eclat nylon bar plugs - Longer design for today's wider bars - Manufactured in the USA by ODI

NEW SUPERLIGHT XC GRIP FOR 2022! In cooperation with an extensive industrial network in Germany, Ergon‘s Research & Development Team has created a new grip for the Ergon line-up. The new foam-like material offers high damping thanks to the unique material characteristics and achieves a precise texture that matches the zones of the hand. Until now, this was nearly impossible with simple ultralight grips on the market today. Ergon GXR - hand ergonomics and lightweight proprietary AirCell Rubber compound 100% made in Germany! - Size Small: 32mm / 80 grams - Size Large: 34mm / 95 grams - Use: XC, Marathon, Bikepacking, Endurance - Grip material: proprietary AirCell Rubber - SGS Certified for purity and quality - Right and Left hand specific grips. - Completely new grip material for increased damping on your favorite trails. - Optimized form allows for reduced gripping force. - Grip zones are matched to the hand. - Replaceable end plug. - Carbon bar compatible. - No inner core. - No locking clamp.

Ergon's GA2 All-Mountain / Gravity grip has superb tactile feel thanks to a super-soft, UV stable rubber compound exclusively developed and manufactured in Germany for Ergon. The ergonomic shape requires less rider grip pressure while specific grip zones matched to the shape of the hand increase tactile feedback and traction. The inner construction varies in thickness to allow greater damping, which results in less ulnar nerve stress. The inboard aluminum clamp holds grips securely, allows even more grip area at the end of the bars, and makes these grips carbon-bar friendly.

Ergon's GA2 Fat is for riders with large hands or high demands for damping, offering extra thick circumference. The ergonomically optimized form allows reduced force while gripping, because the grip zones are matched to the hand, allowing greater control on demanding trails. The inner construction varies in thickness allowing for greater damping without loss of control. The GA2 Fat has a superb tactile feel, and the super soft, UV-stable rubber compound is exclusively manufactured in Germany for Ergon. The inboard aluminum clamp holds grips securely, allows even more grip area at the end of the bars, and makes these grips carbon-bar friendly. - Length: 136mm - Lock On: Yes - Weight: 135g

The new GFR1 has a slim overall shape for maximum feedback, yet still provides an extremely high level of damping through the ribbed section under the palm. The lower gripping zone is aggressive to keep gripping forces at a minimum when lifting the front wheel. - Shape: Round - Lock On: Yes - Grip Shift Specific: No - Flange: No