Parts & Accessories

The Wahoo RPM speed sensor is the sleek, magnet-less solution for capturing cycling speed data. It easily mounts to your bike's front wheel hub, and the Bluetooth Smart and ANT+ dual band technology allow you to connect to and display data on both smartphones and bike computers. Tracking speed data has never been this easy. - Both ANT+ and Bluetooth Smart capabilities allow for a wireless connection to both smartphones and bike computers. - No tangled wires on your bike to connect the sensor to your device. - The RPM speed installs easily with no magnets required - It only weighs 16.5 grams with the mount included - Provides accurate speed data during your ride - Mounts on most front wheel hub with a secure silicone casing - Two LED lights show the sensor's device connection (blue) and speed detection (red) - No charging required! Operates on a coin cell battery for up to 1 years. - RPM Speed will fit with most bikes and frame sizes

Mounts and parts for WASPcam Gideon, 9900, 9901, and JAKD cameras

Gain more room or find the perfect position for lights, computers, music players, GPS, or whatever, with the Topeak BarXtender. Attaches securely to the handlebars or stem and adjusts for optimum position. - Clamp: Fits 22-38 mm tubes (shims included) - Crossbar: Device mount bar 25.4 mm - Material: Engineering Grade Plastic and Steel - Mount: Handlebar, Handlebar Stem - Size (L x W x H): 18 x 3 x 3 cm, 7.1” x 1.2” x 1.2” (folded) - Size (L x W x H): 13 x 10 x 3 cm, 5.1” x 3.9” x 1.2” (open) - Weight: 116 g / 4.08 oz

This handlebar bracket has been developed so you can attach a tablet to your handlebars. The design provides a safe distance so that no sweat falls on the screen while you are training. - Suitable for handlebars with a diameter ranging from 26mm to 35mm - Adjustable to different tablet sizes: length 182-267mm, width 112-197mm, max. thickness 13mm

The Stages Spindles "G" bottom bracket spindle allows the retrofit of the carbon Stages Power meter for SRAM BB30 DUB MTB cranksets. The spindle is manufactured for Stages Cycling by Full Speed Ahead, forged and machined out of aluminum to allow for the carbon Stages Power meter for FSA 386 EVO and Stages Carbon 30mm model to be used with SRAM DUB MTB. The Stages Power meter 30mm spindle is specifically designed to meet or exceed the performance of the manufacturer's stock component, while allowing the retrofit of the new carbon Stages Power Meter to a rider's SRAM drivetrain. - Spindle only

Securely holds your Turbo Connect Display/Speedzone 2 computer. - Specialized Turbo Connect Display (TCD)/Speedzone 2 Display mount. - Left- and right-side compatible. - MTB-style above-the-stem mount.

Securely holds your Turbo Connect Display/Speedzone 2 computer. - Specialized Turbo Connect Display (TCD)/Speedzone 2 Display mount. - Left- and right-side compatible. - Road-style above-the-stem mount.

Our patented ANGi sensor calls for help when you can’t. In fact, it’s the first device to protect you before, during, and after a crash. It does this through a pairing with our Specialized Ride App for iOS or Android devices. And if it detects a crash, it commences a countdown that, if you’re ok, you can stop and keep riding. If, however, ANGi determines that you’re in need of help, it’ll send an alert to your selected contacts with your last known GPS coordinates and a message that you’re in need of help. What about if you’re out of service coverage? ANGi has a plan for that. Just set your estimated ride time before you head out when you know that your ride will take you out of range. All you need is an active data signal when you start your session. And if you haven’t completed your ride within that time frame, ANGi will send a notification to your contacts with your last uploaded location. - ANGi is a ride tracker, crash detector, and safety beacon. - Includes a one-year subscription to Specialized Ride Premium app. - Detects and reports potentially dangerous helmet impacts to the Specialized Ride app, which notifies your emergency contacts and sends them your most recent GPS coordinates. - Additional premium features include start ride notifications and ride-time alerts. - Attaches to Specialized ANGi-ready helmets. - Approximate six months' battery life on a 2032 coin cell battery. - Weight: 10 grams w/ battery - Two-year sensor warranty

SL Range Extender Cable 285mm MTB

Charge your Specialized Turbo battery with this high output, custom Li-ion charger. • Custom Specialized Li-ion battery charger • Output: 42V4A • Compact design while delivering huge power • With Rosenberger plug and light indication of the charging status

CR2032 Lithium 3V battery for SIGMA computers, heart rate monitors, transmitters, and Micro Lights. Compatible with: - PC3 - PC4 - PC9 - PC15 - Shape watch - FIT watch - Onyx series HRM's - PC 25.10 - PC 3.11 - PC 10.11 - PC 15.11 - PC 22.13 - RC 1209 - RC 14.11 - RC Move - Micro Lights Not Compatible with: - ROX computers - BC 1909 - BC 2209 - BC 23.16

The QuickView was designed to put the Garmin Edge Computer out in front of the stem. Fits Garmin 605 and 705. - Glass-filled nylon, stainless steel Torx T25 bolt - Weight: 20g

- Use to keep Blips in place on handlebars - Fits 31.8mm round portion of drop bar - Clamp mounts directly to bar outside of tape zone - Ideal for use with thumbs or index fingers while hands are on the tops - Right and left specific, just like Blips - Weight: 12 grams (for pair) - Material: Polypropylene - Compatibility: 11-speed - Recommended Group: SRAM RED eTap

Easily secure your GPS cycling computer to your favorite bike. Includes: - Two sets of O-rings (two diameters) - A backup O-ring in each size

A lightweight and highly adjustable mount for positioning any Garmin computer on aero bars. The pivoting two piece design offers multiple mounting positions based on aero bars, hydration systems and rider preference. - For 22.2mm diameter aero bar extensions - Compatible with all Garmin EDGE computers - Highly adjustable for multitude of mounting positions - Replaceable Garmin Insert with K-EDGE “Definitive Click” locking system - GoPro Interface Compatible - Weight: 29g - Anodized Colors: Black, Red, Blue - Made in Boise, Idaho, USA - Lifetime Guarantee against material or manufacture defects. Damages due to abuse or crashing excluded

The K-EDGE Gravity Top Cap is a great computer mount for those mountain riders that already a lot going on with the cockpit of their bikes, or just want a simple and sleek looking computer mount. The Top Cap replaces your already existing top cap with the K-EDGE Gravity top cap. Ideal position for Downhill and Enduro racing/riding, but is also a popular solution for any bike when using a smaller style computer (20, 25, 200, 500, 510, 520, 820). - CNC Machined 6061-T6 Aluminum Platform, Injection Molded Garmin Specific Co- Polymer Interface - Compatibility: All Garmin Edge® Computers including the 1030*, 1000*, 820, 810*, 800*, 510, 520, 500, 200, 25, 20. Also supports the Touring, Touring Plus, Forerunner 310XT, and 910XT. (Larger EDGE computers such as 800, 810, 1000, 1030 may interfere with very steep, upright, stem angles.) - Made in Boise, Idaho, USA. - Lifetime Guarantee against material or manufacture defects. Damages due to abuse or crashing excluded.

K-EDGE’s legendary CNC machined aluminum quality and strength for the price conscious cyclist. Pro positioning of your computer, out-front and flush with the top of the handlebar. - CNC Machined 6061-T6 Aluminum Platform, Injection Molded Copolymer Interface - Compatibility: Wahoo Bolt - Fits Handlebars: 31.8MM - NOT GoPro Interface Compatible - Anodized Color: Black Please contact K-EDGE warranty manager Info@K-EDGE.com for questions or concerns. We highly suggest you follow the recommendations in the Sigma instructions that recommend use of the provided tether leash.

Monitor your speed and cadence as you ride with these easy-to-install wireless sensors. With no magnets or other exposed parts to line up, these sensors are easy to install, maintain and move between bikes. The speed sensor 2 attaches to the hub of either wheel and self-calibrates with your Edge cycling computer or compatible Garmin device to give you accurate speed and distance at all times — even without a head unit. The cadence sensor 2 fastens to any size crank arm and measures pedal strokes per minute so you can get the most out of your training. Send live speed, distance and cadence data to compatible training apps or displays by using ANT+ connectivity and BLUETOOTH Low Energy technology. With both of these sensors on your bike, you can work to improve your personal best or see where you stand against the pros.

Complete two tasks with one cable using our charging/data clip. Connect the cable to your computer's USB port to recharge your compatible device and to transfer data to and from your computer. This cable also pairs with an optional AC adapter (sold separately). Compatible Devices: - Approach G10 Approach G10 - Approach S20 Approach S20 - Forerunner 230 Forerunner 230 - Forerunner 235 Forerunner 235 - Forerunner 35 Forerunner 35 - Forerunner 630 Forerunner 630 - Forerunner 645 Forerunner 645 - Forerunner 645 Music Forerunner 645 Music - Forerunner 735XT Forerunner 735XT - vívomove HR vívomove HR

- Convenient additional accessory holder for handlebar - 31.8mm CNC alloy clamp - Includes 25.4 and 26.0mm shims

Cadence Magnet for all CatEye computers that record cadence.

Wheel magnet for all CatEye cycle computers

- Easy to mount smartphone case holder - High resistance against impacts - 360 degrees adjustable angle - Quarter-turn type mount allows to place the phone in portrait or landscape mode - Waterproof, touch-screen compatible cover included

- Adjustable handlebar mount for any Z Console - Puts the phone front & center of the stem in either landscape or portrait mode - Integrated GoPro camera mount - Sturdy aluminum construction - For 31.8mm handlebars (includes shims for smaller diameters)

With the Tacx tablet stand you can place your tablet at a comfortable height and distance while using your bike trainer. Adjustable to different tablet sizes - length 182-267mm, width 112-197mm, max. thickness 13mm.

This mounts specifically to the Blendr system supported by Trek, which is similar to a GoPro interface. Featuring an accessory bolt hole pattern, it can be used with Stages accessories. - For Stages Dash L10, L50 and M50 - Fits Blendr-compatible stems - Works with Stages accessories, including GoPro attachment

This mounts specifically to the Blendr system supported by Trek, which is similar to a GoPro interface. - Designed to mount Dash above additional accessories or to the Blendr stem with a bottom attachment - For Stages Dash L10, L50 and M50 - Fits Blendr compatible stems

This mount fits most integrated bar/stem designs with a two-bolt interface below stem. - Mounts to a 2-bolt pattern (parallel to the direction of a stem) integrated handlebar (bolts not included) - Holds the dash level to the bars and in front of the bike. - For Stages Dash L10, L50 and M50 - Fits Shimano PRO and some Canyon integrated bars

Place Dash behind the bar for improved visibility and better protection from mishaps on the trail. - Mounts to the left of the stem, holds the Dash above the stem and bars such that a crash will not break the Dash - Has a plastic clamp that requires 2.5mm allen key to tighten to handlebars - Has rubber spacer so the mount can be used on 31.8mm bars. No accessories can be bolted to the bottom of the mount. - For Stages Dash L10, L50, and M50 - Compatible with 31.8mm and 35mm bars

Attaches Dash to steer tube beneath top cap. Great for mountain bikes and setups with minimal handlebar space. - Mounts to the top cap of a bike by replacing a headset spacer - Angle can be controlled by loosening and tightening the pivot bolt - For Stages Dash L10, L50, and M50 - Fits all 1-1/8" headsets with room for a spacer over the stem

This mount has accessory bolt holes on the bottom so it can be used with stages accessory attachments. - Mounts to the right TT bar, holds the dash in the center of the TT bars by tightening 2.5mm allen key head bolts - Can fit smaller 22mm bars using a rubber spacer (included) - Height, and therefore, bar clearance can be controlled by adjusting the pivot screw. - For Stages Dash L10, L50 and M50 - Compatible with 24mm and 22mm aero extensions - Fits a wide range of aero bars and includes a pivot for multiple placement options and ideal viewing angle

Stages magnet-free Cadence sensors fit to your crank arm and rear hub to provide real-time, accelerometer-based cadence data to your cyclometer or phone via ANT+ and Bluetooth Smart. - Compatible with most crank arms - Installs/removes in seconds - IPX7 Water-resistant - Super light—just 8 grams - Runtime: 600 hours - Operating range: 18-200 rpm - Blue and red LEDs indicate pairing, activation, and low battery status

Stages magnet-free Speed sensors fit to your hub to provide real-time, accelerometer-based speed data to your cyclometer or phone via ANT+ and Bluetooth Smart. - Compatible with most wheels - Installs/removes in seconds - IPX7 Water Resistant - Super light—just 8 grams - Runtime: 600 hours - Operating range: 2-60 mph - Blue and red LEDs indicate pairing, activation, and low battery status

Securely holds your Turbo Connect Display/Speedzone 2 computer. - Specialized Turbo Connect Display mount. - Left- and right-side compatible. - Mountain bike design situates a CPU above stem. - Fits 35mm handlebars.

Kit containing all replaceable items for the Specialized power meter pod. - White silicone O-ring. - Two M3x5 stainless steel screws.

Whether it's just having a second battery for peace of mind, or for carrying on a ride you know is going to require a bit more juice, Specialized's Turbo SC battery has a long lifecycle for that extra distance. It charges super fast and has a massive 691Wh capacity. - Custom Li-Ion battery for Turbo. - 691Wh capacity (60 cells x 3.2Ah) with ANT/BT module to connect to external devices. - Allows super-fast charging times and a long life cycle.

This custom Li-Ion Turbo Vado Battery features a 604Wh capacity and is compatible with all Turbo Vado models. It's fully integrated with the frame, removable for easy charging and lockable for added security. - Please Note: The Turbo Vado Battery does not include a battery cover. - Battery features a 604Wh capacity. - Works with all Turbo Vado models. - Lockable and down tube integrated. - Chargeable either on- or off-the-bike. - Includes LED power indicator.

The new DN300 Built-In type battery features the same waterproof design that Di2 users have loved for generations. Now with 3 ports, it delivers stable power to Shimano's 12-speed road derailleurs (and shifters if a fully wired option is selected). - Compatible with thinner next-generation electric wire SD300 and systems after R9250/R8150 series - Li-Ion type - Capacity: 500 mAH |3.7Wh (± 2000km autonomy) - Rated voltage: 7.4V - Charges through RD-R9250 |RD-R8150 rear derailleur using EW-EC300 Di2 Charging Cable (sold separately) - Fixing small parts included - Weight: 52g

Be it the fireworks of a finale, an ideal rhythm, climbing on the top, or a deep, dark place extracting the last kilojoule of effort on your bike split, you want to adjust your gear with the twitch of a finger. eTap Blip satellite shifters allow you to shift when you want, where you want. - Limitless remote shifting positions for drop and aero bars - Wired shift buttons can be positioned however the rider prefers - Connect to Blip Box or drop bar eTap levers - Compatible with SRAM RED eTap shift/brake controls

SRAM eTap batteries are literally a snap to remove and charge. Just flip the tool-free battery latch up and slide the battery up and out of the derailleur. Then snap the battery into the USB powered charger and connect the charger to any USB power source or A/C USB adaptor. A full charge takes just 45 minutes to complete. - Finish: Black - Compatibility: SRAM RED eTap

SRAM eTap Battery is the power source for the eTap system. The same power unit is interchangeable between front and rear derailleurs. - Up to 1000 kilometers of riding per charge - Weight: 24g - Finish: Black - Compatibility: SRAM RED eTap

External Blip mount for aero extensions and base bars - 360 degree rotation for adjustment - Aero use only to fit 22.2mm OD bar 65mm in length - Fits all Zipp aero extensions and base bars - Blips not included - Weight: 57 grams for pair (does not include Blip) - Material: Polypropylene + TPE - Compatibility: 11-speed - Recommended Group: SRAM RED eTap

MORE POWER, WITH SECURITY, MORE COMFORT. Water-repellent mobile phone case for the bicycle handlebar Everything in view - in any weather: The smartphone case COM/SMARTBAG can be attached to any COMPIT cell phone holder thanks to the adapter. A special COMPIT cover is therefore not necessary. The large transparent window ensures that the touchscreen is easy to operate, and it is also possible to unlock the cell phone with a fingerprint directly through the film. The lower extra compartment not only offers additional storage space for keys and money, but also space for the COM/UNIT power bank for inductive charging of the mobile phone while driving. For attachment to the COMPIT mobile phone holder system When touring in rough terrain, it is advisable to charge the cell phone with a cable. Optionally, the COM/UNIT can also be attached directly under the SMARTBAG to the COMPIT smartphone holder. In this case, the mobile phone must always be charged via cable through the cable guide. Suitable for smartphones with a maximum size of 155 x 80 x 15 mm. - Only compatible with the COMPIT system - Extra storage space - Water-repellent - Can be operated through foil - For all common smartphones - Weight: 115g

COMPIT Phone Covers (or the COMPIT Phone Adapter) are needed to securely mount the phone to the COMPIT unit. The cover has a special mounting device that allows the phone to be docked into the COMPIT system. Enclosing the outer edges of the phone and extra-durable at the points of maximum stress, this cover is made of shock-absorbing, high-quality, wear-resistant plastic. It can be easily attached and removed from the phone. - For iPhone 11 Pro

COMPIT Phone Covers (or the COMPIT Phone Adapter) are needed to securely mount the phone to the COMPIT unit. The cover has a special mounting device that allows the phone to be docked into the COMPIT system. Enclosing the outer edges of the phone and extra-durable at the points of maximum stress, this cover is made of shock-absorbing, high-quality, wear-resistant plastic. It can be easily attached and removed from the phone. - For iPhone 6+/7+/8+

COMPIT Phone Covers (or the COMPIT Phone Adapter) are needed to securely mount the phone to the COMPIT unit. The cover has a special mounting device that allows the phone to be docked into the COMPIT system. Enclosing the outer edges of the phone and extra-durable at the points of maximum stress, this cover is made of shock-absorbing, high-quality, wear-resistant plastic. It can be easily attached and removed from the phone. - For iPhone 6/7/8

COMPIT Phone Covers (or the COMPIT Phone Adapter) are needed to securely mount the phone to the COMPIT unit. The cover has a special mounting device that allows the phone to be docked into the COMPIT system. Enclosing the outer edges of the phone and extra-durable at the points of maximum stress, this cover is made of shock-absorbing, high-quality, wear-resistant plastic. It can be easily attached and removed from the phone. - For iPhone X/XS

COMPIT Phone Covers (or the COMPIT Phone Adapter) are needed to securely mount the phone to the COMPIT unit. The cover has a special mounting device that allows the phone to be docked into the COMPIT system. Enclosing the outer edges of the phone and extra-durable at the points of maximum stress, this cover is made of shock-absorbing, high-quality, wear-resistant plastic. It can be easily attached and removed from the phone. - For iPhone XR/11

COMPIT Universal-Cover Adapter (or COMPIT Phone Covers) are needed to securely mount the phone to the COMPIT unit. The adapter with the special mounting device allows the phone to be docked into the COMPIT system. The cover attaches to the user's favorite phone case with self-adhesive 3M film.

Spare parts for Quarq's ShockWiz automated suspension tuning device. - Contains a rubber mounting boot, four zip ties, plastic cap and two o-rings.

Profile Design's UCM XL Universal Computer Mount provides a convenient 60mm-long place to mount your computer on your aero bars. It installs without tools, stays put and can be positioned as needed for easily viewing and controlling your computer.

22mm Wrist Band

22mm Wrist Band - Silicone

Thanks to its adjustable, aerodynamic and slim design, Polar's Adjustable Front Bike Mount is a perfect fit for challenging rides. It gives you the best viewing angle and easy access to your bike computer at all times. Plus it only takes up a small space on your handlebar. You can attach the unit in any direction you'd like–either around the handlebar or the stem of your bike. The front bike mount is optimized for the standard 31.8 mm diameter handlebar.

CADENCE SENSOR BLUETOOTH® SMART Boost your cycling performance and find out what your most efficient pedaling rate is. The sensor works with Bluetooth® Smart technology and consumes only a little energy. You can later analyze your training at the Polar Flow web service. - Compatible with dozens of leading fitness apps - Small and light design with firm bike attachment - Compatible with iPhone 4S and later, and with selected Android devices including Samsung Galaxy S3 and S4 using Android 4.3 or later.

Charging Cable 2Nd Gen

Stay true to your style – this crystal wristband puts the finishing touch to any look. Beautifully embellished with real crystals from Swarovski®. Fits all Polar fitness watches with 20 mm wristbands. The quick-release spring bars make the swap go smoothly. Materials: - Wristband: Comfortable & durable fluoroelastomer - Buckle: Stainless steel Compatible products: - Polar Ignite 2 - Polar Ignite - Polar Unite

POLAR LEATHER WRISTBAND 22 MM Make your Polar sports watch ready for any occasion with a genuine leather wristband. The elasticated section under the buckle ensures a secure and comfortable fit around your wrist. Swap the band easily with the help of the quick-release spring bars. Compatible products: - Polar Grit X - Polar Vantage M Materials: - Wristband: genuine vegetable-tanned leather - Elasticated section: polyester and elastane (latex-free) Sizing: - M/L: wrist circumference 145-215 mm

POLAR IGNITE SILICONE WRISTBAND Bring a fresh touch to your style with a changeable wristband for your Polar Ignite fitness watch. Choose from classic black, elegant white, vibrant yellow or energetic orange. Sizing: S: wrist circumference 130-185 mm M/L: wrist circumference 155-210 mm

CHANGEABLE M200 WRISTBAND Blend Polar M200 with your personal style – either choose your signature color or alternate to suit your mood or outfit. Choose from Black, White and Fresh Blue. - Small/Medium: 135–170 mm - M/L: 150–210 mm Measure the circumference of your wrist, then choose the right wristband size.