$7.99
Topeak's Shuttle Levers will remove even the most stubborn downhill tires. These levers are extra long for leverage and are made of engineering-grade plastic that is strong, rigid and durable.
$199.99
Designed for riders and home mechanics, it is an ideal and durable tool set.
1-Freewheel turner
1-15mm pedal wrench
1-Freewheel remover for Shimano® and other cassetees lockrings, W/center pin
1-Spoke wrench for 0.127" nipple (black)
1-Spoke wrench for 0.130" nipple (green)
1-Spoke wrench for 0.136" nipple (red)
1-Mavic® spoke wrench (yellow)
2-Phillips 2, Slotted 6 screwdriver
3-Tire levers
9-T/L handle hex set, size:2/2.5/3/4/5/6/8/10mm,Torx® 25
$7.99
TB-1709 is a tapered brush for clean those hard to reach places such as frame and tire.
$9.99
TB-1901: 3mm x 0.5, for rear wheel drop-out alignment screws
TB-1902: 5mm x 0.8, for water bottle, toe clip, fender and rack bosses
TB-1903: 6mm x 1.0, for cantilever brakes and large fender bosses
TB-1904: 10mm x 1.0, for derailleur hanger
$11.99
Removes 4-notch BMX & single and single-speed freewheels.
Use with 24mm wrench.
$34.99
- 4-in-1 cable cutter
- Cuts cables and housing
- Crimps cable ends
- Crimps housing end caps
- Housing end reformer in the handle TB-4575
$54.99
• Use to install dust seals for Bluto and RS1 forks
• See Service Manual for instruction
$13.00 - $18.00
- For installation and removal of 20t splined Shimano/ISIS bottom brackets
- To be used with 1/2" driver
$26.50
- Cable Cutter
- Cuts cable, housing and wire quickly and easily.
- Thumb-lock closure is easy to open and protects cutter when closed.
$18.84
Cable plier, with a thumb lock to hold the cable tight for one-hand operation.
$12.50
- Crank Remover
- With patented interchangeable adaptor fits both square & hollow axles.
- For use with 8mm hex key wrench.
$16.00
- Crank Extractor
- Contains 14x15mm sockets & 8mm hex key for crank bolt and crank arm removal.
- Patented interchangeable adaptor fits both square & hollow axles.
$32.50
- Disc Brake Piston and Pad Alignment Tool
- Reposition pistons or help align disc pads with this easy to use tool.
- It's made of Cr-Mo steel with a comfortable and oversize rubber handle for a great grip.
$10.00
- Hex Key Wrench Set
- Contains 2, 2.5, 3, 4, 5, 6, and 8mm standard & 4, 5, 6mm ball end
$17.00
- Nipple Wrench for Deep Rims
- The V-spring grabs the nipple to screw on deep rims to prevent the nipple from dropping.
- With depth control function to release the nipple after 3~4 mm on the spoke.
- Also can use with 1/4" electric screwdriver.
$30.00
- Press-Fit Bearing Removal Tool
- For internal diameter 24mm to 30mm bottom bracket bearings
$8.50
Patch Kit w/18 patches, 3 tire levers, 10ml adhesive, 8cm valve hose and sandpaper
$157.00
- Totally 40 functions:
- 04C2 Crank remover
- 09C1 Freewheel tool for Shimano CS compatible cassettes
- 33S1 15mm pedal wrench
- 35V8 8x200mm hex key wrench with coating
- 28P1 PH1 Philips screwdriver
- 28S6 S6 Flathead screwdriver
- 25H6 6" forged adjustable wrench
- D8D4 Adapter (8mm to 1/2" Drive)
- 12F8 Precise 8-groove spoke tool, for 10-15G
- 11F3 Crank adaptor for Shimano Hollowtech II compatible
- 53S3 Multi-speed freewheel turner
- 61A3 Chain tool, for 7~10 speed chains
- 56E6 Glueless patch AirDam
- 64P3 POM tire levers, set of 3 pcs
- 39H4 9x10mm open end wrench
- 97T1 "Star-8" T-9x10x15x20x25x27x30x40 Star Keys
- 97Y1 "Mighty-7" 2x2.5x3x4x5x6mm Hex Keys, T-25 star key
Page 1 of 2
Next page