- Totally 40 functions: - 04C2 Crank remover - 09C1 Freewheel tool for Shimano CS compatible cassettes - 33S1 15mm pedal wrench - 35V8 8x200mm hex key wrench with coating - 28P1 PH1 Philips screwdriver - 28S6 S6 Flathead screwdriver - 25H6 6" forged adjustable wrench - D8D4 Adapter (8mm to 1/2" Drive) - 12F8 Precise 8-groove spoke tool, for 10-15G - 11F3 Crank adaptor for Shimano Hollowtech II compatible - 53S3 Multi-speed freewheel turner  - 61A3 Chain tool, for 7~10 speed chains - 56E6 Glueless patch AirDam - 64P3 POM tire levers, set of 3 pcs - 39H4 9x10mm open end wrench - 97T1 "Star-8" T-9x10x15x20x25x27x30x40 Star Keys - 97Y1 "Mighty-7" 2x2.5x3x4x5x6mm Hex Keys, T-25 star key

Bearing Puller for BB30, BB86, BB92 and Campagnolo Ultra-torque

• Use to install dust seals for Bluto and RS1 forks • See Service Manual for instruction

8" pliers with a long nose.

Remove BB30 Bearings

- Disc Brake Piston and Pad Alignment Tool - Reposition pistons or help align disc pads with this easy to use tool.  - It's made of Cr-Mo steel with a comfortable and oversize rubber handle for a great grip.

- Press-Fit Bearing Removal Tool - For internal diameter 24mm to 30mm bottom bracket bearings

- Cable Cutter - Cuts cable, housing and wire quickly and easily. - Thumb-lock closure is easy to open and protects cutter when closed.

Set of 2 tire levers.

Cable plier, with a thumb lock to hold the cable tight for one-hand operation.

- For installation and removal of 20t splined Shimano/ISIS bottom brackets - To be used with 1/2" driver

- Nipple Wrench for Deep Rims - The V-spring grabs the nipple to screw on deep rims to prevent the nipple from dropping. - With depth control function to release the nipple after 3~4 mm on the spoke. - Also can use with 1/4" electric screwdriver.

Chain Whip 1/2" x 3/32" w/Ergonomic handle

Pedal Wrench 15mm off-set design w/ergonomic handle

- Crank Extractor  - Contains 14x15mm sockets & 8mm hex key for crank bolt and crank arm removal.  - Patented interchangeable adaptor fits both square & hollow axles. 

- Crank Remover - With patented interchangeable adaptor fits both square & hollow axles. - For use with 8mm hex key wrench.

Removes 4-notch BMX & single and single-speed freewheels. Use with 24mm wrench.

T-Shaped wrench with Torx 30/5mm hex

- Made of Cr-V steel - To be used with 1/2" driver

- Gel contains non-Abrasive plastic beads that provide increased surface friction - Allows for reduced clamping force, prevents crushing of expensive carbon parts (Brake lever/Bar, Bar/Stem, Stem/Steerer, Seatpost/Frame, Etc) - Prevents corrosion/scuffing and quiets creaking noises - Can also be used on non-carbon parts where an increase in clamping friction and/or a reduction in clamping force is desired - Always follow the manufacturer's torque specifications when clamping carbon parts

- Hex Key Wrench Set - Contains 2, 2.5, 3, 4, 5, 6, and 8mm standard & 4, 5, 6mm ball end

For 3.2, 3.3, 3.5, and 4.0mm nipples.

- bearing tool for Vault, V18 or V14 models

Patch Kit w/18 patches, 3 tire levers, 10ml adhesive, 8cm valve hose and sandpaper

- Designed to hold bladed spokes while tightening the nipples

Topeak's Shuttle Levers will remove even the most stubborn downhill tires. These levers are extra long for leverage and are made of engineering-grade plastic that is strong, rigid and durable.

1/2" Dr. bit socket H10 for Campagnolo® B.B. 10mm bolt

The Drive Thru is a dummy hub or chain keeper that replaces your wheel while cleaning the chain. It is a fast and effective way to clean your chain between races or in your garage. It allows you to fully rotate your cranks and shift through your complete range of gears while protecting the frame. It installs simply with one hand, and is quick and easy to change between bikes. The Drive Thru is also great for packing the bike for transport.  - Note: This product is thread pitch dependent. You must order the same thread pitch as the thru-axle in your bike. - Dummy axle is precision-machined from 7075 aluminum and knurled for easy grip. - Pulley is machined from durable Delrin. - Oil and solvent-resistant O-ring - Lead-in threads designed for quick insertion into the frame - No tools required, simple, one-hand installation - Weight: 62 grams