Skip to main content

Filter By:

$7.99
Topeak's Shuttle Levers will remove even the most stubborn downhill tires. These levers are extra long for leverage and are made of engineering-grade plastic that is strong, rigid and durable.
$4.99
1/2" Dr. bit socket H10 for Campagnolo® B.B. 10mm bolt
$39.99
10" Waterpump like box join pliers.
$199.99
Designed for riders and home mechanics, it is an ideal and durable tool set. 1-Freewheel turner 1-15mm pedal wrench 1-Freewheel remover for Shimano® and other cassetees lockrings, W/center pin 1-Spoke wrench for 0.127" nipple (black) 1-Spoke wrench for 0.130" nipple (green) 1-Spoke wrench for 0.136" nipple (red) 1-Mavic® spoke wrench (yellow) 2-Phillips 2, Slotted 6 screwdriver 3-Tire levers 9-T/L handle hex set, size:2/2.5/3/4/5/6/8/10mm,Torx® 25
$39.99
8" pliers with a long nose.
$9.99
For 3.2, 3.3, 3.5, and 4.0mm nipples.
$7.99
TB-1709 is a tapered brush for clean those hard to reach places such as frame and tire.
$9.99
TB-1901: 3mm x 0.5, for rear wheel drop-out alignment screws TB-1902: 5mm x 0.8, for water bottle, toe clip, fender and rack bosses TB-1903: 6mm x 1.0, for cantilever brakes and large fender bosses TB-1904: 10mm x 1.0, for derailleur hanger
$11.99
Removes 4-notch BMX & single and single-speed freewheels. Use with 24mm wrench.
$19.99
15mm Pedal Wrench
$39.99
Remove BB30 Bearings
$23.99
Set of 2 tire levers.
$34.99
- 4-in-1 cable cutter - Cuts cables and housing - Crimps cable ends - Crimps housing end caps - Housing end reformer in the handle TB-4575
$29.99
- For use with Shimano SM-BB9000 and SM-BB93 outboard BBs
$11.99
T-Shaped wrench with Torx 30/5mm hex
$54.99
• Use to install dust seals for Bluto and RS1 forks • See Service Manual for instruction
$13.00 - $18.00
- For installation and removal of 20t splined Shimano/ISIS bottom brackets - To be used with 1/2" driver
$92.00
Bearing Puller for BB30, BB86, BB92 and Campagnolo Ultra-torque
$8.00
- Designed to hold bladed spokes while tightening the nipples
$26.50
- Cable Cutter - Cuts cable, housing and wire quickly and easily. - Thumb-lock closure is easy to open and protects cutter when closed.
$18.84
Cable plier, with a thumb lock to hold the cable tight for one-hand operation.
$10.00 - $11.78
- Made of Cr-V steel - To be used with 1/2" driver
$12.50
- Crank Remover - With patented interchangeable adaptor fits both square & hollow axles. - For use with 8mm hex key wrench.
$16.00
- Crank Extractor  - Contains 14x15mm sockets & 8mm hex key for crank bolt and crank arm removal.  - Patented interchangeable adaptor fits both square & hollow axles. 
$32.50
- Disc Brake Piston and Pad Alignment Tool - Reposition pistons or help align disc pads with this easy to use tool.  - It's made of Cr-Mo steel with a comfortable and oversize rubber handle for a great grip.
$16.50
Chain Whip 1/2" x 3/32" w/Ergonomic handle
$10.00
- Hex Key Wrench Set - Contains 2, 2.5, 3, 4, 5, 6, and 8mm standard & 4, 5, 6mm ball end
$17.00
- Nipple Wrench for Deep Rims - The V-spring grabs the nipple to screw on deep rims to prevent the nipple from dropping. - With depth control function to release the nipple after 3~4 mm on the spoke. - Also can use with 1/4" electric screwdriver.
$16.50
Pedal Wrench 15mm off-set design w/ergonomic handle
$30.00
- Press-Fit Bearing Removal Tool - For internal diameter 24mm to 30mm bottom bracket bearings
$8.50
Patch Kit w/18 patches, 3 tire levers, 10ml adhesive, 8cm valve hose and sandpaper
$157.00
- Totally 40 functions: - 04C2 Crank remover - 09C1 Freewheel tool for Shimano CS compatible cassettes - 33S1 15mm pedal wrench - 35V8 8x200mm hex key wrench with coating - 28P1 PH1 Philips screwdriver - 28S6 S6 Flathead screwdriver - 25H6 6" forged adjustable wrench - D8D4 Adapter (8mm to 1/2" Drive) - 12F8 Precise 8-groove spoke tool, for 10-15G - 11F3 Crank adaptor for Shimano Hollowtech II compatible - 53S3 Multi-speed freewheel turner  - 61A3 Chain tool, for 7~10 speed chains - 56E6 Glueless patch AirDam - 64P3 POM tire levers, set of 3 pcs - 39H4 9x10mm open end wrench - 97T1 "Star-8" T-9x10x15x20x25x27x30x40 Star Keys - 97Y1 "Mighty-7" 2x2.5x3x4x5x6mm Hex Keys, T-25 star key
$11.00
- Gel contains non-Abrasive plastic beads that provide increased surface friction - Allows for reduced clamping force, prevents crushing of expensive carbon parts (Brake lever/Bar, Bar/Stem, Stem/Steerer, Seatpost/Frame, Etc) - Prevents corrosion/scuffing and quiets creaking noises - Can also be used on non-carbon parts where an increase in clamping friction and/or a reduction in clamping force is desired - Always follow the manufacturer's torque specifications when clamping carbon parts
$56.00
- Stainless steel measurement tool has gauges for all current headset bearing standards (Campagnolo, Cane creek, TH/FSA) - Includes inside gauges for headtubes and cups and outside gauges for bearings
$8.99
- bearing tool for Vault, V18 or V14 models
Page 1 of 1