Removes 4-notch BMX & single and single-speed freewheels. Use with 24mm wrench.

15mm Pedal Wrench

Remove BB30 Bearings

Set of 2 tire levers.

- 4-in-1 cable cutter - Cuts cables and housing - Crimps cable ends - Crimps housing end caps - Housing end reformer in the handle TB-4575

- For use with Shimano SM-BB9000 and SM-BB93 outboard BBs

- Thru-axle adaptor for TB-WS10 Professional Race Workstand - Works with 15mm and 20mm front forks

T-Shaped wrench with Torx 30/5mm hex

• Wall-mount bike rack • Powder-coated finish • Vinyl-coated arms • Holds one bike by the top tube • Folding

Designed to provide hundreds of hours of indoor cycling comfort, the contemporary short-nose saddle shape with ergonomic cutout reduces pressure on sensitive areas. Ride-tuned MCU foam density provides the optimal amount of padding—not too soft, not too firm. - Traditional CrMo rail design - Seat Mast not included

Have another rider in your household who prefers a different saddle? Grab a second seat mast and swap them out in seconds between rides. With 335mm of height adjustment, 80mm of fore/aft adjustment and permanent laser-etched scales, it's quick and easy to dial in your precise fit every time. - Universal saddle clamp works with most saddle rail designs - Saddle not included

Replacement Part – Aero Headlight Bracket - Works For Both Headlights & Tail Lights - 3 Strap Sizes Allows Fitting From 20mm To Over 100mm - Adjusts To Fit Aero & Round Seat Posts & Handlebars - Fits All Serfas Headlights Except: USL-200 & USL-450

Cell Phone Top Tube Bag - Replaceable Cover (Lt-Stm4Rt) - Large Secondary Pocket - Secure Three Strap Design - Touch Screen Capable Replacement Cover - Cell Phone Cover Will Fit Up To Iphone 6+™ - Size: 7” X 4” X 3.75” - 105 Cubic Inches

Battery Replacement Guide For E-Lume Series Headlights: - E-Lume USL-200/250, 1-Cell Li-Ion 1400 mAh (ESB-1400) - E-Lume USL-450/500, 1-Cell Li-Ion 2200 mAh (ESB-2200) - E-Lume USL-600/650/850/900, 1-Cell Li-Ion 2600 mAh (ESB-2600) - E-Lume USL-1100/1200, 2-Cell Li-Ion 2200 mAh (ESB-4400) - E-Lume USL-1500/1600, 2-Cell Li-Ion 2600 mAh (ESB-5200) - Battery Removal/Installation Instructions Included - Allen Key Tool Included

Replacement/Spare Part – UNI-GO2 GoPro Adapter Bracket Allows mounting of Serfas headlights to GoPro action camera mount systems (e.g. helmet mount, handlebar mount, etc.) - Compatible with all current E-Lume and late model True Series headlights

The Micro Blast is what you need for easy inflation on the road or trail. This easy to use CO2 inflator head comes with two 16 gram threaded cartridges and a sweet little foam cartridge cover that protects from cold cartridges while in use. The simple spring push design makes it easy to inflate your Presta valved tube. - Fits all threaded CO2 cartridge sizes - Alloy mini head with threaded spring push design - Includes two 16g CO2 cartridges - Includes one reusable foam cartridge cover to fit 12g or 16g cartridges

3-IN-1 Handlebar Mounted Accessory Holder: 3-IN-1 Design: - Headlights - Action Cameras (GoPro) - Garmin Computers (Compatible w/ Garmin Only) - Adjustable Angle (100 Degree Tilt Up/Down) - Materials: Aluminum Alloy, Nylon - Simple Installation Specs: - Length: 105mm - Width: 68mm - Height: 57mm - Weight: 76g - Snap Ring Fitment: 31.8-32mm Bars - Max Load: 400g

Replacement battery for 2019 True Series MTB & Road headlights. Plastic storage case included.

Replacement Part – Universal Handlebar Bracket - Fits all current Serfas headlights with a removable bracket - Fits bars up to 31.8mm horizontal & vertical adjustable - Easily removes from bar in seconds - No tools needed - Works With: TSL-100, TSL-150, TSL-150+, TSL-200, TSL-250, TSL-250+, TSL-500, TSL-500+, TSL-1000, TSL-1500, SL-155, SL-255, USL-155, USL-305, USL-505, TSL-350, TSL-550, TSL-750, TSL-T1000, TSL-LT1000, TSL-1200, TSL-1800, TSL-2500, HL-1.1, & SL-30WP - Works for all Serfas headlights EXCEPT for SL-200 & SL40WP

• Use to install dust seals for Bluto and RS1 forks • See Service Manual for instruction

- A great way to mount a light, computer, power meter or GPS unit in the center of a threadless stem - Made in the USA - Material: 6061 Aluminum - Weight: 24g - Outside Diameter: 26.0mm - Stem Size: Threadless 1-1/8"

The OTTO Mount is an accessory for on-the-bike carry of OTTOLOCK. It's made of flexible silicone and has four ladder-strap hooks to ensure a snug, secure fit for multiple places on your bike. Note: Make sure all four hooks are engaged with your OTTO Mount ladder strap, and you position the OTTOLOCK head weight near the clamp to ensure you do not lose your OTTOLOCK. - Recommended for the 18" OTTOLOCK only - Flexible inner fit-up diameter accommodates 1 – 2" (25 – 51cm) round bicycle tubes - Material: silicone

The NiteRider Adjustable Angle Tail Light Strap Mount was specifically designed for our flagship tail light, the Sentinel. It allows you to fine-tune the mounting angle of the light to display the projected Laser Lanes even and parallel on the ground. It's an easy on and off non-slip tail light mount that also features a grooved contact pad that makes this the 'go to' mount for riders using aero seat posts. System Compatibility - Sentinel - Solas - Sabre - CherryBomb

The NiteRider Bullet offers excellent rear light projection and daytime visibility with Optimal VIZ. Keep tabs on battery life with the integrated low power indicator. - 200-lumen output - Group Ride Mode—be seen without distracting fellow cyclists - Varying steady and safety flash modes - USB rechargeable - FL1 Standard IP64 Water Resistant

The Explorer headband adjusts to various head shapes and sizes. System Compatibility: - Explorer 350 - Pro Series - HID Series - Classic Plus & Seclect - Evolution & Digital Evolution - HeadTrip & Digital HeadTrip - TrailRat & TrailRat Select - RoadRat - Digital Patrol LED - Digital Patrol - Pre 2001 systems

All of our head light mounts deliver rock solid mounting but for those that demand the most rigid set up, the NiteRider Lumina Handlebar Clamp Mount is here to deliver a high degree of performance and stability. Fits a max bar diameter of 35mm. SYSTEM COMPATIBILITY - Lumina Series - MiNewt Cordless Series - Mako Series WARRANTY - This NiteRider accessory is backed by NiteRider’s lifetime warranty that covers any defects in mechanical components (housings, covers, mounts and fasteners)

The NiteRider Hardshell Helmet Mount gives you the option to mount your head light directly onto your hardshell helmet using high strength 3M VHB adhesive. ?Not compatible with Lumina Series Lights. System Compatibility - Pro Series - HID Series - Classic Plus & Select - Evolution & Digital Evolution - HeadTrip & Digital HeadTrip - TrailRat & TrailRat Select - RoadRat - Digital Patrol LED - Digital Patrol - Pre 2001 systems

The NiteRider Lumina Handlebar Strap Mount offers a wide variety of handlebar size fitments and remains rock solid while riding through rough terrain. It’s easy to install and, like all NiteRider mounts, features a quick release tab for when it’s time to recharge or leave your bike unattended. System Compatibility: - Lumina Series - Mako Series - MiNewt Cordless Series

Increase your line of sight with the NiteRider Lumina Helmet Mount. By mounting your head light onto your helmet, it’ll allow you to see farther into your turn or wherever your head turns. System Compatibility: - Lumina Series - MiNewt Mini Series - Mako Series

The NiteLink remote allows the rider to pair and simultaneously power on/off the Lumina Max headlight and Omega EVO 300 taillight wirelessly. - All New design equipped with NiteLink Wireless Technology - Lights sold separately

The NiteRider Omega 300 Seat Post Straps install quickly and easily with the loop around and hook design. - Compatibility: Omega 300 Tail Light only - Fits 27.2mm seat posts

Helmet mount for all systems that use the slider mounting clip. Not compatible with Lumina Series Lights. System Compatibility - Pro Series - HID Series - Classic Plus & Select - Evolution & Digital Evolution - HeadTrip & Digital HeadTrip - TrailRat & TrailRat Select - RoadRat - Digital Patrol LED - Digital Patrol - Pre 2001 systems

Pro Series Low Profile Helmet Mount (Not for Lumina Series Lights) System Compatibility: - Pro Series - HID Series - Classic Plus & Select - Evolution & Digital Evolution - HeadTrip & Digital HeadTrip -TrailRat & TrailRat Select - RoadRat - Digital Patrol - Pre 2001 Systems

The NiteRider Sentry Aero 260 Standard and Aero Seat Post Straps provide options for a proper and correct fitment onto standard and aero seat posts. Installation is easy with the loop around and hook design. - System compatibility: Sentry Aero 260 Daylight Visible Tail Light only - Includes: (1) Standard Seat Post Strap, (1) Aero Seat Post Strap - Standard Strap: 3.625" length with comfortable stretch to 5.5" length, fits 27.2mm seat post - Aero Strap: 5.5" length with comfortable stretch to 9" length, fits 30.9 or 31.6mm seat post

The NiteRider Tail Light Mount – Seatstay and Seatpost is our classic seatpost mount design that gives riders the option to mount their tail light to their seat stay, using the included seat stay clamp. System Compatibility - Sentinel - Solas - Sabre - CherryBomb - TL 5.0 SL

The NiteRider Tail Light Rack Mount gives you the option to mount your tail light directly onto your rack-ready/-equipped bike via this rack mount accessory. System Compatibility - Sentinel - Solas - Sabre - CherryBomb - TL 5.0 SL

The NiteRider Tail Light Strap Mount allows for quick installation and fitment on to standard seat posts. It features a quick release tab that allows you to remove just your tail light, leaving the strap mount installed on the seat post; ideal for when you leave your bike unattended or when it's time for a recharge. System Compatibility - Sentinel - Solas - Sabre - CherryBomb - TL 5.0 SL Not compatible with omega 300 and sentry aero 260 tail lights.

In-vehicle charging adapter for charging USB rechargeable NiteRider lighting systems. Charging cable not included. System Compatibility - All Lumina Series - Swift Series - MiNewt Cordless Series - MiNewt Mini Series - Lightning Bug 120 - Sentinel - Solas - Omega - Sabre - Sentry Aero - Stinger

Handlebar mount for all systems that use the slider mounting clip. Fits handlebar clamp diameters from 25.4mm–35mm. System Compatibility: - Pro Series - HID Series - Classic Plus & Select - Evolution & Digital Evolution - HeadTrip & Digital HeadTrip - TrailRat & TrailRat Select - RoadRat - Digital Patrol LED - Digital Patrol - Pre 2001 systems

- Creates a ceramic coating for incredible durability and long distance performance - Provides ultra low friction for ultimate drivetrain efficiency - Waterproof qualities excelling in wet conditions - 95% biodegradable

- pH balanced formula: enriched with Aloe Vera, Shea Butter and Sunflower Oils - Provides deep moisturising and lasting protection - Uses natural fragrances and ingredients - Suitable to use on sensitive skin

A steampunk statement for your handlebars. A transparent dome lets colorful gear workings of the insides of the bell be seen. The Gear Bell is even rainproof.

- For installation and removal of 20t splined Shimano/ISIS bottom brackets - To be used with 1/2" driver

Bearing Puller for BB30, BB86, BB92 and Campagnolo Ultra-torque

- Designed to hold bladed spokes while tightening the nipples

- Cable Cutter - Cuts cable, housing and wire quickly and easily. - Thumb-lock closure is easy to open and protects cutter when closed.

Cable plier, with a thumb lock to hold the cable tight for one-hand operation.

- Made of Cr-V steel - To be used with 1/2" driver

- Crank Remover - With patented interchangeable adaptor fits both square & hollow axles. - For use with 8mm hex key wrench.

- Crank Extractor  - Contains 14x15mm sockets & 8mm hex key for crank bolt and crank arm removal.  - Patented interchangeable adaptor fits both square & hollow axles. 

- Disc Brake Piston and Pad Alignment Tool - Reposition pistons or help align disc pads with this easy to use tool.  - It's made of Cr-Mo steel with a comfortable and oversize rubber handle for a great grip.

Chain Whip 1/2" x 3/32" w/Ergonomic handle

- Hex Key Wrench Set - Contains 2, 2.5, 3, 4, 5, 6, and 8mm standard & 4, 5, 6mm ball end

- Nipple Wrench for Deep Rims - The V-spring grabs the nipple to screw on deep rims to prevent the nipple from dropping. - With depth control function to release the nipple after 3~4 mm on the spoke. - Also can use with 1/4" electric screwdriver.

Pedal Wrench 15mm off-set design w/ergonomic handle

- Press-Fit Bearing Removal Tool - For internal diameter 24mm to 30mm bottom bracket bearings

- Storage Hooks with machine thread and nuts & washers - Sold as a pair

Patch Kit w/18 patches, 3 tire levers, 10ml adhesive, 8cm valve hose and sandpaper

- Totally 40 functions: - 04C2 Crank remover - 09C1 Freewheel tool for Shimano CS compatible cassettes - 33S1 15mm pedal wrench - 35V8 8x200mm hex key wrench with coating - 28P1 PH1 Philips screwdriver - 28S6 S6 Flathead screwdriver - 25H6 6" forged adjustable wrench - D8D4 Adapter (8mm to 1/2" Drive) - 12F8 Precise 8-groove spoke tool, for 10-15G - 11F3 Crank adaptor for Shimano Hollowtech II compatible - 53S3 Multi-speed freewheel turner  - 61A3 Chain tool, for 7~10 speed chains - 56E6 Glueless patch AirDam - 64P3 POM tire levers, set of 3 pcs - 39H4 9x10mm open end wrench - 97T1 "Star-8" T-9x10x15x20x25x27x30x40 Star Keys - 97Y1 "Mighty-7" 2x2.5x3x4x5x6mm Hex Keys, T-25 star key

- Gel contains non-Abrasive plastic beads that provide increased surface friction - Allows for reduced clamping force, prevents crushing of expensive carbon parts (Brake lever/Bar, Bar/Stem, Stem/Steerer, Seatpost/Frame, Etc) - Prevents corrosion/scuffing and quiets creaking noises - Can also be used on non-carbon parts where an increase in clamping friction and/or a reduction in clamping force is desired - Always follow the manufacturer's torque specifications when clamping carbon parts